Dodge SRT Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Replaced the 3/4 blocker plates but still having issues downshifting into 3rd. I'm wondering if excessive wear on the 3rd shift selector side of the 3/4 shift fork is my problem. New shift cables and bushings installed recently by previous owner. It's not a clutch or related parts problem.
145791
 

·
Registered
Joined
·
186 Posts
When you took it apart did you by chance look at the synchro for 3rd. It’s the ring that has somewhat of a soft sandpaper feel on the inside of it.. if it’s worn away that’s gonna be your problem!
 
1 - 3 of 3 Posts
Top