Dodge SRT Forum banner

Wikyd Performance Windage tray and Crankscraper setup

935 views 1 reply 1 participant last post by  Wonderer876 
#1 ·
Introducing the Wikyd Performance complete Windage tray and crank scraper setup Group Buy. Not your average home depot supplied parts like other vendors. With our known customer service to back it up. We are bringing these out at a special Group buy rate so get in on them now while the price is low. What you are getting is our proprietary 1/16" thick Teflon," cut to fit" to your setup with simple scissors, crank scraper that takes care of the entire crankshaft and rod assembly scraping instead of just parts of it.
Our 304 stainless steel windage tray that fits with or without crank straps, (any strap kit on the market), solid riveted in place. The tray itself is designed to control Windage and limit oil "crawling" up the oil pans walls under hard acceleration or heavy braking.
Our tray mounts, (sandwiches) Between the pan and engine bedplate for simple install, Provided the mounting instructions are followed.
We are also including new studs for the oil pump side of the oilpan so you no longer have to worry about stripping out the oil pump mount threads when you torque that side of the pan, instructions for where to mark your oil dipstick for the new oil levels after balance shaft housing is removed from the pan.

Also as an added bonus on the Group buy only, we will include new bolts for the four balance shaft mount holes to keep that extra bit of bedplate rigidity in place for FREE. After the Group Buy this will be a $30 option at regular price.

Not only are you getting a quality product like we are known for, but you are also getting our known history and track record for years of good service, Not a shady vendor whom tries to hide its history.
So all in all you get;
Cut to fit Teflon crank scraper.
304 Stainless steel Windage tray.
Mounting studs for oil pump side of the the oil pan.
4 mounting bolts that take place of the original balance shaft housing mount bolts.
Instructions on where to mark your original dipstick for new oil level in pan.
Full instructions on how to install and cure the Rtv gaskets.

We will run this group buy until the sales start to trickle in, then they will got to the full price. Also don't forget our prices always included shipping, we are the originals on that in the SRT world.
GROUP BUY PRICING FOR ENTIRE KIT. $245 shipped
Regular pricing after group buy with no housing mount bolts included for free $290 SHIPPED.
ORDERS WILL BE SENT OFF IN GROUPS OF 10 OR 20, DEPENDING ON HOW QUICK THESE MOVE. SO AFTER YOUR GROUP HAS BEEN SUBMITTED EXPECT 10-14 BUSINESS DAYS ON SHIPPING ON THE GB SALES ONLY.

PAYPAL IS: r.moreno.jr@hotmail.com
Dealers please pm myself or Josh Thompson to setup your pricing.
 

Attachments

See less See more
5
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top