Dodge SRT Forum banner

1 - 20 of 35 Posts

·
Registered
Joined
·
14 Posts
take off the spoiler..then drive until i cant drive anymore.. then race my friend s with turbo charged honda's and mustang gt's
 

·
Registered
Joined
·
867 Posts
35-50 shot and window it 1000-3000 rpm, then put a toggled water sprayer to the I/C. Lower it about an inch then put a set of kumhos on the front. Get slits sewn in the seats for a harness. Then start on the Mopar kit. An LSD will be made one day and there is no stopping me with that.

-James
 

·
Registered
Joined
·
103 Posts
people break your car in before you go "lay" into it. It is the smart thing to do. I speak from experiance, I was so excited to get my celica two years ago, it had 3 miles on it when I drove it off the lot, I redlined the damn thing all the way home and for about 10 days after that, well at about 1,000 miles it started knocking, kinda sucks it isnt very loud but enough to notice, I credit this to no break in.

On a side note, please be careful racing, try to keep it on the track, I love everyones opinions and thoughts that are posted here, wouldnt want to lose any of them.
 

·
Registered
Joined
·
867 Posts
srt4ownage Posted: Tue Dec 17, 2002 7:52 am Post subject:

--------------------------------------------------------------------------------

water sprayer in ic hmmm sounds interesting got any links??
No, but I have an SCCA buddy who has a WRX and we did it to it. We also did it to a Turbo Beetle. All you need is an old windshield wiper fluid container (get on that fits in an out on the way area) and two window sprayer jets, both found at your local junk-yard. Get new water tubing and a new small electic water pump, both found at discount auto stores. Next in the wiring and the toggle switch and you get those at Radio Shack. We used an in-line fuse metered to the pump and put the switch in the coin trays. Zip-ties and heat-shrink, with a good knowledge EP and it shouldn't take to long.

iwntasrt-4 Posted: Tue Dec 17, 2002 3:00 am Post subject:

--------------------------------------------------------------------------------

I redlined the damn thing all the way home and for about 10 days after that, well at about 1,000 miles it started knocking, kinda sucks it isnt very loud but enough to notice, I credit this to no break in.
11.5 to 1 Comp % + less than 1500 mls ( redline * 10 days) = metal scrap.

What was the compresion and leak down #s after the failure? And did they ask if you if you were spraying? Find metal shavings in the Exhaust piping before the Cat? I've heard some traggic things done w/new cars...But ...Wow!

-James
 

·
Registered
Joined
·
14 Posts
the water nozzle thing sounds easy im good at wiring things up =) but wouldnt you need more than 2 sprayers to actuall ydo anything..
and i was laying in bed last night thinking of new ideas... like something to spray thats colder than water or somehow bringing the temp of the water toa lmost freezing then spraying it.. ill work on it tonight and see what i can come up with.
 

·
Premium Member
Joined
·
5,578 Posts
like something to spray thats colder than water or somehow bringing the temp of the water toa lmost freezing then spraying it..
like nitrous? :wink: you could even use denatured alcohol for cheaper then Nitrous Oxide.
 

·
Registered
Joined
·
2,971 Posts
Wonder if you could use a standard paintball CO2 tank. It sprays cold, and cost 3bucks for a 20oz fill. Turn it upside down and spray liquid CO2. Much colder than water..... hmm...
 

·
Registered
Joined
·
14 Posts
c02 upside down!!! now we gotta figure out how to make it spray over the entire intercooler... hmm
just like 3 small c02 bottles over the top of the ic and have it spray down from the top... hmm i wonder what hp gains we are looking at..
 

·
Premium Member
Joined
·
5,578 Posts
http://www.nitrousexpress.com/productdisplay.php?sku=5183&hdwt=31101&loc=101&dealer=
 

·
Registered
Joined
·
103 Posts
I will get the NX sprayer, fill it with C02, ill put it on a dyno, spraying and not spraying and let you know how it goes. I might even try to have an extra bottle with nitrous and compare the C02 to nitrous, I dont know the temp difference between the two but it would be fun. I will be on the dyno a lot, my brother and his best friend own a paint shop and next door is a shop that has a dyno and they are able to use it for next to nothing (like $10 an hour).
 

·
Premium Member
Joined
·
5,578 Posts
cool, now all we have to do is wait for the damn thing to come out. :cry:
 

·
Registered
Joined
·
175 Posts
My very first mod is going to be new springs....stock that SRT-4 looks like a 4x4. I think I *may* take off the wing...but i dont want to deal with holes in the trunk. I am going to get some new rims too...I honestly cant stand the stock ones. Normally I am "all go and no show"....but the styling of the new SRT-4 is kinda nasty. After I take care of the outside...I wanna get this car to 300 wheel horsepower. Then maybe get a new race steering wheel and recaro race seats. This car makes me wanna go really raced out cause it has a ton of potential. I have a 2000 civic si right now, but I have restrained from going all out on mods, cause the car gets very minimal gians, so there really is no point. The SRT-4 on the other hand looks like its gonna be a freakin beast!!
 

·
Registered
Joined
·
62 Posts
srt4ownage said:
take off the spoiler..then drive until i cant drive anymore.. then race my friend s with turbo charged honda's and mustang gt's

Same here..... !Baby Stroller Wing, then break it in so I can further piss off my Mustang friends.


-Chris
 

·
Registered
Joined
·
11,093 Posts
First thing I will do is develop a bolt on 3" downpipe and check engine fix. Then a 3" catback system. Im hoping to have it into production in about 4 months from now.
 
1 - 20 of 35 Posts
About this Discussion
34 Replies
19 Participants
Lancer172
Dodge SRT Forum
The community to discuss high-performance Dodge vehicles from the SRT and PVO groups, SRT-4, SRT-6, SRT-8, and SRT-10. Come join the fun!
Full Forum Listing
Top