Dodge SRT Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
274 Posts
Discussion Starter #1
I just recieved my WGA and am trying to install it when i find out that the hole that goes onto the internal wastegate arm is too small. This is extremely fruastrating please respond ASAP.
 

·
Registered
Joined
·
274 Posts
Discussion Starter #6
hey Kinetics, can you send me the bottomg peice with the correct hole size??? PM me. Thanks!
 

·
Registered
Joined
·
1,076 Posts
We had some complaints about the WGA holes being too large, so we stopped drilling them out. You're going to need to drill the hole to 21/64" and it should pop right on with no problems.:thumbsup:
 

·
Registered
Joined
·
962 Posts
We had the same issue with ours but i just took my step bit and drilled it out.

Minor inconvience but still an excellent product. :thumbsup:
 

·
Registered
Joined
·
434 Posts
Four Banger Anger said:
We had some complaints about the WGA holes being too large, so we stopped drilling them out. You're going to need to drill the hole to 21/64" and it should pop right on with no problems.:thumbsup:

21/64" too many people complained the holes were too big, so we don't drill them anymore :ninja:
 
1 - 9 of 9 Posts
Top