Dodge SRT Forum banner

1 - 2 of 2 Posts

·
Premium Member, SRT of the Month
Joined
·
5,535 Posts
Discussion Starter · #1 ·
well i was having problems with my boost controller that i purchased from turbonetics... come to find out.. it will not work on the srt4 turbo setup... it has to be a dual action wastegate or something like that.... so i just wasted my money because now they will not take it back... he kept telling me all i need was a bleed valve.... that no boost controller would work on this car....
so i just took it off and adjusted my agp wastegate to hold15 and spike at 18 in wot shifts thru the gears cars running fine
 

·
Registered
Joined
·
448 Posts
yeh, it's only for use on dual port wastegate actuators, in short it has to have 2 vacuum lines being fed to the actuator where our and most cars have 1...



see how that has a pipe for one vacuum line, the turbonetics controller is for use with actuators that have 2 pipes off the actuator and the controller goes between the lines... unforunatly that can not workf or you...
 
1 - 2 of 2 Posts
Top