tune with ptp
1 - 6 of 6 Posts
2
Here are a couple of things that can help you. First, for the install, check this drawing I made to visualize the wiring shit. Be carefull because some people said the color of wires is not always the same. make sure you have a multimeter to verify the +5 volts DC and ground wires.
![]()
Then you need to adjust the voltage. Use this chart to give you a starting point for tuning.
![]()
Then you need to adjust the voltage. Use this chart to give you a starting point for tuning.
1 - 6 of 6 Posts
