Dodge SRT Forum banner
1 - 20 of 36 Posts

·
Registered
Joined
·
3,357 Posts
Discussion Starter · #1 · (Edited)
i dont have a scanner right now so i cant post the sheets, but i had three runs

Run 1 - 244.36HP 272.12TQ / 85.95 Deg. 47% Hum.
Run 2 - 239.97HP 268.98TQ / 86.77 Deg. 47% Hum.
Run 3 - 229.85HP 258.23TQ / 85.85 Deg. 46% Hum.


I was very impressed w/ the results, im the dyno king for the 4cyl, everyone was like whats done to it?? im like its stock

It was on a DynoJet Dyno
 

·
Registered
Joined
·
3,357 Posts
Discussion Starter · #7 ·
thanks guys, ik some of you may be calling bs, but i dont have a scanner so i cant show you, but if the stage1 doesnt produce more power i will sell it, and the stage 2 wga im getting it from a guy off the forums
 

·
Registered
Joined
·
2,166 Posts
What type of dyno? What type of day? Correction factor would be nice too. Strict #'s are not the end all and be all.
 

·
Registered
Joined
·
3,357 Posts
Discussion Starter · #10 ·
yea man, ive got the sheets right in front of me ill try to post the sheets soon so yall arent like BS here is one of the direct qoutes from the dyno sheet


RunFile_004.drf - 9/29/2004 8:27.20PM Run Type: RO Run Conditions:86.77Deg F, 27.32 in-Hg, Humidity: 47%, SAE: 1.12 Max Power = 239.97 Max Torque = 268.98
 

·
Registered
Joined
·
1,432 Posts
what gear did you make the pulls in? 3rd or 4th?
 

·
Registered
Joined
·
21 Posts
red95hondakillr said:
he did a 4th gear pull, but if 4th is horrible i would hate to see 3rd that would be nasty, ubt im scanning in the sheets right now, and ill try to have thm up in a few min
SAE1.12??? maybe thats why its a tad high? 93 octane?
 

·
Registered
Joined
·
2,081 Posts
YoungSRT; Any Dyno, Any car; Do the run in the gear closest to 1:1. In the SRT4 thats 4th gear. If you run in another gear you might as well just make up numbers because there's no valid comparison to other cars or other dynos.4th gear pulls and SAE correction and then you can compare other cars and other dynos.
 

·
Registered
Joined
·
1,082 Posts
red95hondakillr said:
i dont have a scanner right now so i cant post the sheets, but i had three runs

Run 1 - 244.36HP 272.12TQ / 85.95 Deg. 47% Hum.
Run 2 - 239.97HP 268.98TQ / 86.77 Deg. 47% Hum.
Run 3 - 229.85HP 258.23TQ / 85.85 Deg. 46% Hum.


I was very impressed w/ the results, im the dyno king for the 4cyl, everyone was like whats done to it?? im like its stock

It was on a DynoJet Dyno
How many miles are on the car?
 

·
Registered
Joined
·
547 Posts
haljensen1 said:
YoungSRT; Any Dyno, Any car; Do the run in the gear closest to 1:1. In the SRT4 thats 4th gear. If you run in another gear you might as well just make up numbers because there's no valid comparison to other cars or other dynos.4th gear pulls and SAE correction and then you can compare other cars and other dynos.
Ok that makes sence... Thanx for the info. :thumbsup:
 
1 - 20 of 36 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top