Dodge SRT Forum banner

Srt-4 zeta 2.8 dyno built with e85!

2K views 0 replies 1 participant last post by  ZETA2.8 
#1 ·
This was done on a mustang dyno.
I had a IC coupler pop off after the 25psi pull, i ran out of time after that, I could of seen another possible 10-20 or more hp with the 3bar map cut off which is around 28.5 psi.


https://www.youtube.com/watch?v=GpoDtwlq2UU
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top