Dodge SRT Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter #1 (Edited)
Drag radials available

Nitto came through with some 18" drag radials, and I ordered up a set today.
Jegs part # 726-40188 just under $500 for the pair to my door.
I will run them on my Mag SRT on the 18" steel cop car wheels $65 each

They have them in 28.8" tall with a 12" section, that is the # from above
They also have a 26.5 tall but that would have us bumpin redline from the gear loss. I wanted the 10 MPH buffer room for a few tweaks.

My Dak has run a 1.76 60 ft and I want to get the Mag down to the same 1.7's range. It did 2.0's last fall. With the 52-48 weight bias it should do much better.

DB
Just ran a 1.96 today on the RSA's @ 32lbs
[email protected] 106.93 mph
Update next weekend if weather permits.
 

·
Registered
Joined
·
71 Posts
Good numbers! Let me know how the 18" wheels and DRs do for you. I have been eyeballing a setup similar for our SRT-8. If the ESP would not pull power/apply brakes, I think we could run 1.8 60's with no problems. :thumbsup:
 
1 - 2 of 2 Posts
Top