Dodge SRT Forum banner
1 - 19 of 19 Posts

·
Registered
Joined
·
153 Posts
Discussion Starter · #1 ·
ok i went to this shop to get my stock rims powdercoated flat black. well they finally got to the actual powdercoating process and there telling me that there powder is not goin on correctly. there saying when they apply the coat it to stick to the rim. im going there tomarro to see what happend, but have any of you guys had this problem?i will post pics tomarro
 

·
Registered
Joined
·
153 Posts
Discussion Starter · #2 ·
they said when they started one it started outgassing. which is when the metal bubbles up cause of the aluminum rim. they say i might need to get them wet coated
 

·
Premium Member
Joined
·
617 Posts
NeonSRT9 said:
they said when they started one it started outgassing. which is when the metal bubbles up cause of the aluminum rim. they say i might need to get them wet coated
They didn't prep/clean the wheel correctly. The Hardest part about coating srt wheels is the stripping of the old paint/epoxy coating. If you don't do it correctly then you will get outgassing. Also since the aluminum is a pourus material, it helps to smooth it out by wet sanding before the prep/cleaning process. We've coated a few sets of srt wheels, and only had problems once or twice, that were both remedied by stripping, cleaning better, and recoating.
 

·
Registered
Joined
·
12,011 Posts
learn to spell and you might get a response.
 

·
Registered
Joined
·
374 Posts
Sota227990 said:
learn to spell and you might get a response.
Your a moron! You have POPSICLE spelt wrong in your sig you duesch bag... If you have nothing intelligent to speak keep it to yourself.

BTW I agree with winker they have got to prep the rimms better before they try and apply anymore coating wet or dry if it's not prepped right they will never look as good as they could of.
 

·
Premium Member
Joined
·
3,378 Posts
ACRin954 said:
Sota227990 said:
learn to spell and you might get a response.
Your a moron! You have POPSICLE spelt wrong in your sig you duesch bag... If you have nothing intelligent to speak keep it to yourself. .
I believe you mean "you're a moron" Since you are essentially saying "you are a moron" as opposed to referring to the moron he owns. Your welcome in advance!:thumbsup:

ACRin954 said:
BTW I agree with winker they have got to prep the rims better before they try and apply anymore coating wet or dry. If it's not prepped right they will never look as good as they could of.
You misspelled rim. Also, it would help if you put a period after dry and started a new sentence. I went ahead and corrected it in my quote of your post. I hope that by me being so helpful with your posts, that we can start a lifelong friendship.

Bye bye my new friend!:hi:
 

·
Registered
Joined
·
374 Posts
VanillaXtract said:
ACRin954 said:
Sota227990 said:
learn to spell and you might get a response.
Your a moron! You have POPSICLE spelt wrong in your sig you duesch bag... If you have nothing intelligent to speak keep it to yourself. .
I believe you mean "you're a moron" Since you are essentially saying "you are a moron" as opposed to referring to the moron he owns. Your welcome in advance!:thumbsup:

ACRin954 said:
BTW I agree with winker they have got to prep the rims better before they try and apply anymore coating wet or dry. If it's not prepped right they will never look as good as they could of.
You misspelled rim. Also, it would help if you put a period after dry and started a new sentence. I went ahead and corrected it in my quote of your post. I hope that by me being so helpful with your posts, that we can start a lifelong friendship.

Bye bye my new friend!:hi:
Your post has been edited. For one I wasn't trying to keep proper punctuation. Two your a dumb bama ******* that probably just finished porking your sister, who the hell wants your dumbass as a friend? And three no one was even talking to you, you sir are a troll with a big internet dick, I'm trembling with fear. I'll be your friend for the moment your done sucking off my shot one time boy. Have a nice day, your moron #2 for the day. Congrats you bloody kunt!
 

·
Premium Member
Joined
·
617 Posts
wow, grammar police handing out tickets hardcore in this thread. Just make sure they're prepping the wheel correctly, and have them avoid heating them up too many times... aluminum is funny sometimes when heated to many times.
 

·
Premium Member
Joined
·
3,378 Posts
ACRin954 said:
Your post has been edited. For one I wasn't trying to keep proper punctuation. Two your a dumb bama ******* that probably just finished porking your sister, who the hell wants your dumbass as a friend? And three no one was even talking to you, you sir are a troll with a big internet dick, I'm trembling with fear. I'll be your friend for the moment your done sucking off my shot one time boy. Have a nice day, your moron #2 for the day. Congrats you bloody kunt!
You edited my post? What did you change so I won't make the mistake again? For one, you should keep proper punction. Poor grammar makes you look retarded. Two, I am not from Bama, I am from Orlando. Three, I don't have a sister, but if I did, that would be a turn on for sure. Lot's of people want and have me as a friend. Thanks for the compliment on the size of my e-penis. And you may have serious issues if you want some "dumb bama *******" to suck you off. If I am moron #2, you must be moron #1. We have something in common! That is so very exciting, goodbye pal.

FYI, I added you to my buddy list :thumbsup:
 

·
Registered
Joined
·
153 Posts
Discussion Starter · #13 ·
yea this place i took them too is pretty fuckin stupid. excuse my french but they said they couldnt do it. i was so pissed off and it also took them 3 weeks just to tell me that they couldnt do it. but yea i know its possiable to do the powdercoat they just dont know what the heck there doing.
 

·
Premium Member
Joined
·
617 Posts
NeonSRT9 said:
yea this place i took them too is pretty fuckin stupid. excuse my french but they said they couldnt do it. i was so pissed off and it also took them 3 weeks just to tell me that they couldnt do it. but yea i know its possiable to do the powdercoat they just dont know what the heck there doing.
I was gonna say I could help ya out, but you're kinda far away.
 

·
Forum Moderator
Joined
·
6,200 Posts
VanillaXtract said:
ACRin954 said:
Sota227990 said:
learn to spell and you might get a response.
Your a moron! You have POPSICLE spelt wrong in your sig you duesch bag... If you have nothing intelligent to speak keep it to yourself. .
I believe you mean "you're a moron" Since you are essentially saying "you are a moron" as opposed to referring to the moron he owns. Your welcome in advance!:thumbsup:

ACRin954 said:
BTW I agree with winker they have got to prep the rims better before they try and apply anymore coating wet or dry. If it's not prepped right they will never look as good as they could of.
You misspelled rim. Also, it would help if you put a period after dry and started a new sentence. I went ahead and corrected it in my quote of your post. I hope that by me being so helpful with your posts, that we can start a lifelong friendship.

Bye bye my new friend!:hi:
Wouldn't that be "YOU'RE welcome" since you're saying 'you are welcome' instead of the welcome he owns?
 

·
Registered
Joined
·
5,587 Posts
This thread and all those who posted in it are :gay:

...Oh wait...
 

·
Registered
Joined
·
69 Posts
S2R0T044 said:
Wouldn't that be "YOU'RE welcome" since you're saying 'you are welcome' instead of the welcome he owns?
I was thinking the same thing. What's that, like a quadruple owned? :grimrippe
 

·
Forum Moderator
Joined
·
6,200 Posts
Laz said:
S2R0T044 said:
Wouldn't that be "YOU'RE welcome" since you're saying 'you are welcome' instead of the welcome he owns?
I was thinking the same thing. What's that, like a quadruple owned? :grimrippe
At least. I don't think one can even calculate the level of pwnAge in this case.
 

·
Premium Member
Joined
·
3,378 Posts
S2R0T044 said:
VanillaXtract said:
ACRin954 said:
Sota227990 said:
learn to spell and you might get a response.
Your a moron! You have POPSICLE spelt wrong in your sig you duesch bag... If you have nothing intelligent to speak keep it to yourself. .
I believe you mean "you're a moron" Since you are essentially saying "you are a moron" as opposed to referring to the moron he owns. Your welcome in advance!:thumbsup:

ACRin954 said:
BTW I agree with winker they have got to prep the rims better before they try and apply anymore coating wet or dry. If it's not prepped right they will never look as good as they could of.
You misspelled rim. Also, it would help if you put a period after dry and started a new sentence. I went ahead and corrected it in my quote of your post. I hope that by me being so helpful with your posts, that we can start a lifelong friendship.

Bye bye my new friend!:hi:
Wouldn't that be "YOU'RE welcome" since you're saying 'you are welcome' instead of the welcome he owns?
Damnit! That's what I get for being an ass, karma sucks....:crying:
 
1 - 19 of 19 Posts
Top