Dodge SRT Forum banner

1 - 20 of 27 Posts

·
Banned
Joined
·
27,026 Posts
Discussion Starter #1
I need those who have purchased the mounts to tell everyone here what type/color and which mounts they got followed by a review of the product. I have installed a few sets my self now but since im technically considered vendor/source i will not give my input. Plus who better to tell you than your fellow owners. Thanks guys 8)
 

·
Premium Member
Joined
·
5,247 Posts
I got the two Flex mounts from Deyeme. They were installed Saturday and so far, I've only noticed a few slight vibrations. There is a small difference in shifting which I think is a good thing. I haven't noticed anything else, but I wasn't really driving it hard in the first place.
 

·
Registered
Joined
·
12,124 Posts
mmounts

Got mine yesterday, installed them in about 30 minutes. (2 FIRM mounts)
That had to be one of the easiest installs of anything I've ever done. :D
I've only gotten a little bit of driving on them, but so far I've noticed almost no new vibrations except right when you start moving in 1st and reverse. Right when you start off it seems I have to give it a little more gas to get moving than I did before, but just barely.
Still can't launch at 3k RPM without wheel hop. :wink:
 

·
Registered
Joined
·
1,843 Posts
you can feel it a little when you rev quick, and when it starts. i got two flex mounts. it still hopped a bit at the track but i revved too high. thing needs wider tires bad. the top mount the gel stuff at the top kinda came out... is this normal?
http://import.h8rs.com/neonwasp/4-13/04-13-03%20028.jpg
 

·
Banned
Joined
·
27,026 Posts
Discussion Starter #5
Re: mmounts

Pit Viper said:
Still can't launch at 3k RPM without wheel hop. :wink:
you are not supposed to be launching THAT high these cars only take 1900-2100rpm to get them to launch good

BTW guys im working to bring you guys the tranny mount ASAP this will help out in any left anything for these cars. I installed a 3 mount set on Second Chance's car and it is trully a 9 and day difference i mean heck look and listen at the SRTvsCivic video...thats his car that launched against the Corrado on concrete pavement :shock:
 

·
Banned
Joined
·
27,026 Posts
Discussion Starter #8
Wasp please take a pic and foward it to Travis www.Deyemracing.com he'll take care of it for ya :wink:
 

·
Banned
Joined
·
27,026 Posts
Discussion Starter #10
Since thats the simple mount Wasp please take the mount off and snap good pics of both sides and any close ups and foward them to Travis please. Thanks
 

·
Registered
Joined
·
1,053 Posts
I just received them also. VERY easy install, and like it was said before, you can only feel it slighjtly when you start the car. First and reverse do take a little more gas to go now. I got the firm mounts, and can still get a little wheel hop, but its so much easier to pull through first than it was before. With a MBC, I had to almost start in second, just to get moving, and not bouncing down the road. :roll:
 

·
Registered
Joined
·
26,203 Posts
NeonWaSp said:
you can feel it a little when you rev quick, and when it starts. i got two flex mounts. it still hopped a bit at the track but i revved too high. thing needs wider tires bad. the top mount the gel stuff at the top kinda came out... is this normal?
http://import.h8rs.com/neonwasp/4-13/04-13-03%20028.jpg
BAD OMEN....
 

·
Premium Member
Joined
·
5,247 Posts
hemidakota said:
NeonWaSp said:
you can feel it a little when you rev quick, and when it starts. i got two flex mounts. it still hopped a bit at the track but i revved too high. thing needs wider tires bad. the top mount the gel stuff at the top kinda came out... is this normal?
http://import.h8rs.com/neonwasp/4-13/04-13-03%20028.jpg
BAD OMEN....
Don't say that... teh Kaiser will drop by with 666 etched in his forehead and none of us want that.
 

·
Registered
Joined
·
1,083 Posts
I've posted my impressions elsewhere, but I'll add to this thread. I've replaced all 3 mounts with firm ones. Based on feedback from other Neon owners, I was expecting massive noise, vibration, and harmonics (NVH) and was truly frightened of the prospects, but charged ahead anyway because I felt it was something that needed to be done if I was going to race the car. The end result was completely unexpected. I hardly feel any extra vibration at all. Oh it's there, but it's not massive. But the payoff is extreme. When I launch the car now, the wheels just spin, they don't hop. The car feels very responsive. I feel like I know just what the engine is doing and where I am on the road. I highly recommend this upgrade. I think the car should've come with these mounts to begin with.

Dan R.
 

·
Registered
Joined
·
12,124 Posts
flame on

I'm going to get in trouble for this, but I didn't use jack stands. Didn't jack the driver's side at all.
Just jacked up the passenger side, put the wheel under it, and swapped the mount. I was never actually under the car, so oh, well.

Ok, now y'all can tell me how stupid I am. :wink:
 
1 - 20 of 27 Posts
About this Discussion
26 Replies
11 Participants
ohyeahwright
Dodge SRT Forum
The community to discuss high-performance Dodge vehicles from the SRT and PVO groups, SRT-4, SRT-6, SRT-8, and SRT-10. Come join the fun!
Full Forum Listing
Top