[jayman931]

I bought the Turbo XS RFL and the Mounting kit. The mounting kit comes with a pressure pipe for the BOV. The problem is on the pressure pipe in the Turbo XS mounting kit there is no inlet for the sensor that is on the stock pressure pipe. Do i drill a hole and put a gromet in for the sensor...or what? Anyone with this BOV/Mounting kit that can help would be appreciated..

 

[jayman931]

what kit did you get?

I bought the Turbo XS BOV and the Turbo XS RFL Mounting Kit thats specifically made for the srt-4....

 

[jayman931]

maybe im retarded (no offense to anyone).....but i assumed if you bought the BOV and also bought the Mounting kit...there was no need to buy a after market pressure pipe...thought the mounting kit is all you needed???? http://www.turboxs.com/turboxssrt4bovinstructions.htm think i have what i need....

 

[jayman931]

...

....figured it all out.... :cow:...now.... :thumbsup: should i mount on cold side of intercooler...or hot side....i was thinking hot as
to not waste any cold air...or is it more personal preferance.....there was a thread a while ago discussing this....

 

[jayman931]

well...thanks for all your help guys.... 8*)....much appreciated....

 

[jayman931]

I see now, you got the AGP style mounting kit that goes on the hot side of the rubber IC hose.

Now i see where to confusion was at!

there should be no sensor mounting hole since that mounts on the hot side.

Yeah...i had people tellin me two different things....hot side and cold side....I got it all worked out...thks all....

 

[jayman931]

...hot