Dodge SRT Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
110 Posts
Discussion Starter · #1 ·
The line below the thorttle body but above the red line which you cap to do the edtip mod on the intercooler pipe came off. The line has some of fuse/blub look end piece on it which has some rubber connection that plugs into the intercooler pipe ( any info on what this line is for would help). Well the rubber piece that helps it connect into the hole securely either broke or fell off and now i have this gap/hole which i cant seem to find out how to fix.
Any info would be greatly apprecaited.
 

·
Registered
Joined
·
11,093 Posts
IF the rubber coupler came off the redline then all you will have to do is get two vacuum caps. One for the hardpipe and one for the red line. The purpose of this red line is so the ecu can antisipate what hte boost will be prior to going into the manifold or something to that nature.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top