Dodge SRT Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
74 Posts
Discussion Starter · #1 ·
Ive been reading on this a bit and i just got some NGK 2314's iridium plugs for my S1 what is the recommended gap setting? on this forum ive seen .40-.45,
.35-.40 and so on they come gapped at .52... so for my S1 what is the recommended gap?
 

·
Registered
Joined
·
5,403 Posts
id leave em at .050, but if you get spark blow out then id lower. you living in a blazing inferno does'nt help you either.....
 

·
Registered
Joined
·
56 Posts
19 psi said:
id leave em at .050, but if you get spark blow out then id lower. you living in a blazing inferno does'nt help you either.....
^^^x2

My plugs are gapped at .050 with Stage 1 -- no issues with spark blow-out.
 

·
Registered
Joined
·
74 Posts
Discussion Starter · #4 ·
hey

Well i changed out my plugs got the iridium NGK's it had base NGK's in it. Anyways i got all my plugs set at .50 when i take the other ones out....
2 plugs were at .52 one was at .58 and one was at .60?! the ride is much smoother when i gas it and redline it now theres no hesitation whatsoever. also i hope that having my gap off that far didnt make anything screwy but we will find out i guess. BTW i didnt put last set of plugs on.
 
1 - 4 of 4 Posts
Top