Dodge SRT Forum banner
1 - 10 of 10 Posts

·
SRTforums Member, SRT of the Month
Joined
·
734 Posts
Discussion Starter · #1 ·
ok now ive red all the things ive needed to that my car has to be done i fixed the mopar bov used the orange bottle sealant. and i still cant boost above 12 psi ill spike to 14 maybe but rarely. so the deal fixes my car puts a new pcm in and does some flash. can they flash it wrong? i go back in monday and the last time they fixed my thorttle postion sensor and my friend said since im not boosting above 12 the computer might not think the car has full throttle so its not boost cuz of the sensor they did a sloppy job putting a new sensor in? omg i love my car sooo much and if one thing goes wrong its on my mind forever. and then the check engine light came on? should i call dodge and have them do something or what im sooooo lost someone please please help a brother out. i think i should jus drive my car though the dealership thats fixing it and call it a day. lol :flame:
 

·
Registered
Joined
·
235 Posts
the code will start with a P, and then 4 numbers. Ex. P---- If you have a CEL, you should get a code. Don't turn over the engine when you do it, just turn the key to the on position and off again within 10 seconds... On the third time you turn the key on you should get your code.
 

·
Registered
Joined
·
2,749 Posts
THe car boosts what it is suppossed to to make 230hp/250tq. The stock computer won't boost any higher unless you have a spring mod, or after-market WGA. Ours was only boosting 10psi on this one day.....the next week the weather was better, and it boosted 12psi. Now we have the AGP WGA, and we set it to 15psi. The stock WGA's spring can only 13psi. So thats the most you'd make, and thats only if its really hot out. I hope I helped, but your code is messed up though.....
 

·
SRTforums Member, SRT of the Month
Joined
·
734 Posts
Discussion Starter · #8 ·
SRT-4aKId said:
THe car boosts what it is suppossed to to make 230hp/250tq. The stock computer won't boost any higher unless you have a spring mod, or after-market WGA. Ours was only boosting 10psi on this one day.....the next week the weather was better, and it boosted 12psi. Now we have the AGP WGA, and we set it to 15psi. The stock WGA's spring can only 13psi. So thats the most you'd make, and thats only if its really hot out. I hope I helped, but your code is messed up though.....
i was boosting 15psi be4 they screwed up and redid everything (my new pcm and a flash) when i first bought it it was doing that but the tps went out and then the pcm went out cuz i was only boosting 3 psi cuz no gas was going to the engine to support the 14 more boost more gas i dont know i dont even think they are certified to work on them im calling :grimrippe dodge!
 

·
SRTforums Member, SRT of the Month
Joined
·
734 Posts
Discussion Starter · #9 ·
they are giving me a new wiring harness? cuz the tps went out and they moved it jus a lil bit and the car stalled i dunno they said they were gonna mess with it and it was under warrenty and they were gonna giv me another one. :thumbsup: i guess that might be good then??
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top