Dodge SRT Forum banner

oil modifier?

675 Views 8 Replies 8 Participants Last post by  Frosty
Hey,

Wondering if anyone around here has installed one. I have one sitting here starring at me and Im wondering if I should install it or not? Did anyone have postive results with it and I know Im dreaming did anyone have dyno results with it?

Let me know, I need another 10 or so hp.

Thanks

Alex
1 - 9 of 9 Posts
i'm not up in canada but i am at 6000ft. i installed it and felt a huge top end difference. i would put it in if i were you. if you've ever taken the valve cover off a car you should be done in less than an hour.
04raw said:
Hey,

Wondering if anyone around here has installed one. I have one sitting here starring at me and Im wondering if I should install it or not? Did anyone have postive results with it and I know Im dreaming did anyone have dyno results with it?

Let me know, I need another 10 or so hp.

Thanks

Alex
I've got one installed....But I can not tell you about the HP gain
I got one installed...and ever since I have a lifter noise on cold start

Dont know if its related tp the oil modifier or not....going to install new lifters next week.

HP gain? Really dont know..
I have its worth the it I dont think anyone other than dcr has dynoed the improvmrnt but if you have a upgraded pcm you will find it pulls cleaner to red line 6500 with a stck pcm you wont notice much as if realy only helps from about 5800 up but dcr claims about 7 hp on a stck setup and between 12 and 15 on stage 2 or 3 I have 1 in both my cars as for lifters noise this will have no efect there
I agree with GLH. Feels cleaner above 5800, can't say if there was a HP improvement as I didn't dyno in between.

Throw it in there, it's easy.
Viper Jr said:
I agree with GLH. Feels cleaner above 5800, can't say if there was a HP improvement as I didn't dyno in between.

Throw it in there, it's easy.
:werd: X 3 :eyebrow:
Thanks for the input guys I'll throw it in and hope for the best then.
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top