Dodge SRT Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
221 Posts
Discussion Starter · #1 ·
How's it going all?

Well I just recently had an AGP wastegate installed along with a mbc, and the wastegate was tuned to ~15 psi, and the mbc set to ~0-1 psi. Now my wastegate must not be doing its job, because I cannot build any boost what so ever. It is like I am only boosting ~2-3 psi.

Any ideas as to where to check underneath the hood for the problem.

Thanks a lot.
 

·
Registered
Joined
·
1,251 Posts
set the MBC to what you would want to boost...say 15psi...and WGA will let you hold that 15 till redline.....

you are only getting 2-3 psi because thats what your mbc is set at
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top