Make sure theres nothing obstructing the TB cable(like the clamp for the UPP)
Need help...
Okay, so I put a new UPP and mpx throttle body on my car and everything seemed to go smooth. Well when I started up my car it immediately jumped up to 2500 rpms, and won't drop. Anyone have any idea of what could be wrong with it. I don't want to have to take it to the dealership, but if that's what I have to do then that's what I have to do. Thanks for the help...
1 - 10 of 10 Posts
yeah that was one of the first things I checked. I took the new throttle body off and put the old one back on to see if that was it and the stock one is doing the exact same thing. I'm stumped...
I'm pretty sure...
vacuume leak? I would also check the tps sensor. wiggle the wires and see if that changes the idle
thanks...I'll try that tomorrow and see if it does anything.
^ what he said.e'ssrt4 said:I would also check the tps sensor. wiggle the wires and see if that changes the idle
Make sure you installed the Idle Control valve correctly.
I had the same issue a while back:eveilgrin.
I had the same issue a while back:eveilgrin.
1 - 10 of 10 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Dodge SRT Forum
The community to discuss high-performance Dodge vehicles from the SRT and PVO groups, SRT-4, SRT-6, SRT-8, and SRT-10. Come join the fun!
Full Forum Listing
Explore Our Forums
Top Contributors this Month
View All
Simon.Starkie
45 Replies
AlmightyFork
37 Replies
JPG
33 Replies
