Dodge SRT Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter · #1 ·
I recently installed the AGP Wastegate and TurboXS HPBC and I'm boosting to about 17 and holding about 14 or 15. I used the blue line and did the ED Tip Mod. I also ordered Stage 1, but who knows when the hell that will come in. I get a lot of surging in 2nd, 3rd, and 4th gear, and I also get that large spike in PSI. I have a 2004. These are my only mods so far.

Would it more wise to just take of the boost controller off and run it with the stock setup with my new WGA. I think it would hold the boost better and wouldn't surge. I think with stage 1 this would be a better setup. Let me know before I spend the time and take of the boost controller?? Thanks
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top