Dodge SRT Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
11,152 Posts
Car needs two things to know whats going on. It needs to know the pressure, and the temperature. With these two things it calculates air density. So your missing one of the equations which you need to fix.

TO solve your grommet problem, go to my sister company, home depot :) get two-three orings and put them over your sensor. Then put your sensor into the charge pipe. That will secure it. Also if you want, put a dab of crazy glue on 4 spots so it wont blow out. Oring shoudl be pretty tight but use a dab or so of glue anyways so it wont pop out.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top