Dodge SRT Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
39 Posts
Discussion Starter · #1 ·
I ordered the mopar sway bar kit from KW and am going to install them. The instructions say to tighten the brackets to the stock torque settings. Anybody know what the specs are for the front and rear brackets?
George
 

·
Registered
Joined
·
387 Posts
From the 2004 Service Manual:

Front
Stabilizer Bar:
Cushion Retainer Bolts 250 in. lbs (20.8 ft lbs)
Link Bolt Nut 275 in. lbs (22.9 ft lbs)

Rear
Stabilizer Bar:
Cushion Retainer Bolts 300 in. lbs (25 ft lbs)
Link Bolt Nut 200 in. lbs (16.6 ft lbs)

No idea why front and back are different.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top