Dodge SRT Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 · (Edited)
Hello all,

I have a kinetic turbo kit up for grabs cheap.

included:
Garrett 50trim (doesn’t smoke at all)
O2 housing with recirc dump
Tial f38 gate w/10psi spring
T3 Log manifold
4” to 3” coupler for intake
Rc 650’s w/ clips
Return fitting on turbo

I made 369whp on 20psi on this setup. Had it on the car for years but is a low mile car so a lot of sitting over the years. The turbo does not smoke at all.No in/out shaft play and no damage to the wheels. One stud from the manifold to turbo is stripped(not the mani) so just needs a new stud to install this kit as is. Uses factory feed line. Can contact me at [email protected] if serious and want pics. I’m located in Maryland and willing to ship.

$700 obo

Justin Vaughn
[email protected]
Baltimore, Md
301-821-5801
 

·
Registered
Joined
·
19 Posts
Hello all,

I have a kinetic turbo kit up for grabs cheap.

included:
Garrett 50trim (doesn’t smoke at all)
O2 housing with recirc dump
Tial f38 gate w/10psi spring
T3 Log manifold
4” to 3” coupler for intake
Rc 650’s w/ clips
Return fitting on turbo

I made 369whp on 20psi on this setup. Had it on the car for years but is a low mile car so a lot of sitting over the years. The turbo does not smoke at all.No in/out shaft play and no damage to the wheels. One stud from the manifold to turbo is stripped(not the mani) so just needs a new stud to install this kit as is. Uses factory feed line. Can contact me at [email protected] if serious and want pics. I’m located in Maryland and willing to ship.

$700 obo

Justin Vaughn
[email protected]
Baltimore, Md
301-821-5801
Will this turbo setup bolt to a MPX exhaust without modifications to the exhaust?
 
1 - 2 of 2 Posts
Top