Dodge SRT Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
210 Posts
Discussion Starter #1
Well, first of all, I searched a lot. All I saw was that our cars have a waste spark. What setting should I put it at for the ignition mode???

Also, I have to put in the MSD Tach Driver, but I was just wondering where the best place to put the gray wire is? I know it has to be a tach wire or rpm operated but I know people have done this, so rather than lose all my patience, Ill just ask you guys. Track opens tomorrow morning, so can someone please help. Thanks.
 

·
Registered
Joined
·
4,066 Posts
So put it on waste spark all right. Each cyl fires twice once during compression and on the downstroke also.

You tap into a wire off of the coil for the tach signal.



Marion
 

·
Registered
Joined
·
210 Posts
Discussion Starter #5
mario03srt said:
So put it on waste spark all right. Each cyl fires twice once during compression and on the downstroke also.

You tap into a wire off of the coil for the tach signal.



Marion

Which one, does it matter which coil neg. you tap into?
 
1 - 5 of 5 Posts
Top