Dodge SRT Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
1,083 Posts
I have a Momo shift knob. Not the same one, but similar. I really don't think the set screws are a problem. Especially with the flattened edge on the top of the shifter, the set screw on that side holds the knob tight. I haven't had any looseness at all.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top