Dodge SRT Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2,486 Posts
Discussion Starter · #1 ·
Does a BOP come with a gasket? and if it does and you dont have one is there anything else you can do? Also can you use the bolts from the mopar BOV to install the BOP?
 

·
Premium Member
Joined
·
9,774 Posts
gtup said:
Does a BOP come with a gasket? and if it does and you dont have one is there anything else you can do? Also can you use the bolts from the mopar BOV to install the BOP?
most do not, I just used a copper flashing gasket and some copper sealant stuff.

you can use the bolts from the MP BOV.
 

·
Registered
Joined
·
1,257 Posts
no it doenst come with a gasket because it doenst need one. I am assuming you are installing an aftermarket BOV... just take off the stock BOV, put the BOP on and then use the same bolts that were holding the stock BOV there. I suggest getting some gasket sealent or something to put around the edges of the BOP to prevent a boost leak.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top