Dodge SRT Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
1,681 Posts
Nothing really all that tricky. A service manual will help, especially putting it back together with all of the torque specs. From when I did mine, all I remember that was tricky was getting the transaxle lined back up. (input shaft into the clutch) There is a small access panel in the passenger side wheel well. you can turn the crank to help get the clutch lined up with the shaft.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top