Dodge SRT Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
880 Posts
Discussion Starter · #1 ·
what do people anticipate the HP/TQ will be with these mods:

3" DP w/cat
upgraded BOV+WG actuator
DSBC
Better s/plugs
Engine Mounts
BOV blockoff plate
K&N air filter

running lets say, 15 psi w/ 91 oct?
 

·
Registered
Joined
·
7,270 Posts
Hypnoz said:
Wow.....

+80ish HP for about 1k

Impressive!
Take a look at the Turbo XS car that Nathan is playing with and you should get a good idea. Just remember that you can only run about 13-14psi with all those mods cause you'll run out of injector, BUT you'll hold it all the way to REDLINE!!
 

·
Premium Member
Joined
·
5,578 Posts
Exhaust Depot said:
not bloody likely.

91 oct. with 15 psi? i cant see 300 with those mods.
 

·
Premium Member
Joined
·
3,671 Posts
I just got back and from running on a dyno....

220.6 HP :? and 276.9 ft-lbs of torque (SAE) :twisted:

Boost @ 15 lbs
92 octane

mods
Race pipe
TurboXS DSBC
K&N air filter

HP was nowhere near where I thought it should be but my torque is out of this world. Either my HP wasn't as high as it should have been to begin with or that extra boost isn't doing much good.
 

·
Registered
Joined
·
880 Posts
Discussion Starter · #7 ·
dayton id say something really wrong there... thats pretty much stock HP
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top