Dodge SRT Forum banner

How to tell if shift fork is bent?

1615 Views 2 Replies 2 Participants Last post by  [email protected]
Well my tranny is apart and I was wondering how to tell if my shift fork is fucked. Reason I ask is before I tore it apart when I would try to into 3rd sometimes it would kick it back out. The synchronizer looks great, so I'm assuming its the shift fork. Thanks guys!
1 - 3 of 3 Posts
Mines looks pretty straight. Are the bent ones usually noticeably fucked up?
i had the same problem as you and it was a bad 3/4 shift fork. i broke mine before i could take it out and inspect for bends/wear, etc. while it's apart, whats a ~$100 part to save your time when it will eventually break. Is there noticable scratches or gouges in the groove area?

1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.