Dodge SRT Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
Good day all!
I’ve recently replaced my entire ac system, from compressor, condenser, receiver drier etc...
So I understand the total system for the 00-05 neons take 6.0oz. Of PAG -46 oil
1)Receiver-Drier 1 oz
2)Condenser 1 oz
3)Evaporator 2 oz
4)Compressor - Drain and Measure the oil from the old compressor.
My question is. Do I pour all 6oz of oil directly in the compressor? Or just 2 oz and fill each prospective part with the required oil?
I don’t have the tools needed to vacuum or charge the system so I was going to take it to a shop and have that done.
Any assistance would be great!
 

·
Premium Member
Joined
·
4,248 Posts
If you dont have a copy of the service manual, i highly suggest downloading a copy. Section 24-57 through 24-58 is all about the refrigerant oil.

While i have never attempted this process my self, it appears some specific equipment may be needed to accomplish the whole task.
 

·
Registered
Joined
·
9 Posts
Discussion Starter #4
If you dont have a copy of the service manual, i highly suggest downloading a copy. Section 24-57 through 24-58 is all about the refrigerant oil.

While i have never attempted this process my self, it appears some specific equipment may be needed to accomplish the whole task.
Yea i will have to download that and give it a look over. Thanks
 
1 - 4 of 4 Posts
Top