All manual boost controllers will need adjustment being that they very due to outside temperature.
To install a vaccum T or a MBC, what you do is take pressure from the green vaccum source (pressure) and put your MBC or bleeder T inline with it. Take the other end of the mbc/bt and hook it up to the wastegate actuator. Remove the black factory line from the WG.
To install a vaccum T or a MBC, what you do is take pressure from the green vaccum source (pressure) and put your MBC or bleeder T inline with it. Take the other end of the mbc/bt and hook it up to the wastegate actuator. Remove the black factory line from the WG.
