Dodge SRT Forum banner

1 - 20 of 478 Posts

·
Banned
Joined
·
1,276 Posts
Discussion Starter · #1 · (Edited)
*** Group Buy Is Closed!!! No More Orders Accepted!!! ***

This Group Buy has been made available to celebrate the beginning of my HID Retrofit Services... I will be offering a Free color matched paint option to the 1st 10 pre-paid orders as well as a $20 discount on the 1st 5 pre-paid orders. The Group Buy has a minimum of 5 orders and is Limited to a maximum of 10 pre-paid orders as too keep the waiting to a minimum. I know this discount is not much compared to the total cost of a retrofit, but you must understand that I don't make very much profit from this service to begin with.

I will ship you the HID components as soon as I receive the required parts. (The components include: D2S Bulbs, Ballasts, and Plug-n-Play Wiring Harness)

All *NEW* options are not going to be availabe for this Group Buy at this time. If these options become available before or during your retrofit, I will post an update. You can send a payment for the new options at that time if you choose to get them.

Details about our HID Retrofit Services can be found here:HID Projector Retrofit Prices & Information - SRT Forums - SRT4, SRT6, SRT8, SRT10 & Dodge Forum

1.wannasupra (*PAID*) - RS6 Bi-Xenon Retrofit (COMPLETE!)
2.Joseph (*PAID*) - TL Bi-Xenon Retrofit (Refund Pending...)
3.DjWillis808 (*PAID*) - RX330 Single Xenon Retrofit (Refund Pending...)
4.SiRDavid (*PAID*) - TSX Single Xenon Retrofit (Refund Pending...)
5.cleveage - (*PAID*) - RS6 Bi-Xenon Retrofit (Refund Pending...)


Requested Refunds are Pending... Estimated payment in December...
1.SRTodd - ($100.00 Non-Refundable Deposit) - RS6 Bi-Xenon Retrofit w/LEDs & CF (Refund Pending...)
2.DaRkILLa - ($100.00 Non-Refundable Deposit) - TL/ZKW Bi-Xenon Retrofit w/LEDs (Refund Pending...)
3.Warren_vill - ($100.00 Non-Refundable Deposit) - TL Bi-Xenon Retrofit w/CF (Refund Pending...)
4.Phillips8201 - ($100.00 Non-Refundable Deposit) - TL/ZKW Bi-Xenon Retrofit (Refund Pending...)


If anyone is interested in a Set of TL's or TSX projectors, you can shoot me a PM of a set that you located on Ebay or HIDPlanet Forums. I will help determine if the set is a good buy or not. When you purchase them, have them drop shipped to me to save on shipping them twice. I will provide my address via PM when needed.

You will need to ask a few questions from the seller:

- Are the chrome bezels polished and matching?
- Do the lenses or reflector bowl have any defects such as cracks, scratches, nicks, etc....?
- Do the mounting points have any defects, if so are they properly repaired?
- Are there any modifications to the projectors and have they been in a previous retrofit?
- Do the TL Bi-Xenon Projectors come with the grey male connector Bi-Xenon Wire harness? (If not, then I will have to fab up some wire harness)
- Do the Bi-Xenon solenoids have any defects, are they in full working condition?
- Are the projectors from a Left Hand Driver vehichle?

Note: No ballasts or bulbs are needed, and your retrofit will come with these parts. If you have no other option but to buy a packaged set of projectors, bulbs, ballasts... then you must decide weather you want to use those or the ones I provide for you. If you use your own, you must provide your own wiring harness, but I will deduct $219 from your total. If you cannot provide your own wiring harness, I can make a custom wiring harness for you for an extra $50.

Retrofit Warranty, Agreement & Standard Pricing
(If there are any questions just let me know.)

All sales final at time of purchase. No refunds

****AGREEMENT TERMS: ALL RETROFITS ARE NOT DOT LEGAL, AND ARE INTENDED FOR OFF ROAD USE. AS A WARNING YOU MUST PROPERLY AIM YOUR LIGHTS SO THAT YOU ARE NOT BLINDING OTHER DRIVERS. I AM NOT RESPONSIBLE FOR ANY ACCIDENTS THAT MAY HAVE BEEN CAUSED BY IMPROPER USE OF THESE LIGHTS. BY PURCHASING THIS RETROFIT YOU AGREE TO THESE TERMS!****

All "New" parts provided through SRT-4Store.com will automatically be covered under a 1 year warranty; however if the retrofit requires the use of a used set of projectors the projectors will not have a warranty. I can test the projectors before even trying the retrofit to make sure all parts work properly. As for the work that I do, I will warranty all work provided in the retrofit service... (Water leaks in the headlight, housing issues, custom wiring, paint etc...) for 1 year.

Full payment is required up front in order to acquire all miscellaneous parts for your retrofit. If you would like to hold a spot in line, I can accept a $100.00 Non-Refundable Deposit. Once I get all the parts it should take about 1 week to finish the retrofit and ship them out to you. This is under the assumption that everything goes well during the retrofit process, weather plays a very big role due to the fact that they must be aimed and tested at night outdoors. I will try my best to keep every order updated with the latest build status.

Parts Included in a Complete Retrofit unless stated otherwise:

-Pair of new aftermarket 03 for black ring or 04+ for chrome ring Depo headlights. (Note: I will not be accepting cores due to the fact that factory headlights cannot be separated cleanly.)

-HID Bulbs, Ballasts, and Wiring Harness. Bulbs can be requested in the color range of 4300K(OEM), 5000K, 6000K, 8000K, 10000K, or 12000K and will be D2S bulbs. It is highly recommended to go with the OEM 4300K bulbs in order to get the highest performance from the retrofit. The ballast will be potted to provide weather resistance and increase reliability.

-Choice of projectors, as long as they've been retrofitted before... TL's, TSX, Bosch, Valeos, E55's...etc. If they've been done before, I can do them. (NOTE: I can only provide Bosch, RS6, and possibly Valeo projectors, other projectors must be sent to me due to the fact that they are not as widely available and the prices are not consistant.)

I accept Paypal payments via: [email protected]

Price Includes All Hardware (Projectors, HID components, Headlights, etc...), Labor, and Shipping:
***Complete HID Retrofit Packages***
$799.00........Bosch ECE LHD Single Xenon D2S Projector Retrofit
$1037.99......RS6 ECE LHD Bi-Xenon D2S Projector Retrofit

Price is dependant on market value of projectors. Customers can provide projectors as well:
***Partial HID Retrofit Packages***
$454.99........Valeo *Halogen Only* Projector Retrofit (Easily upgrades to HID when ready!) *Projectors NOT Included*
$679.99........Valeo Halogen Projector Retrofit with D2S HID Adapter (HID Upgrade Included!) *Projectors NOT Included*
$679.99........Lexus RX 330 Single Xenon D2S Projector Retrofit *Projectors NOT Included*
$679.99........TSX DOT LHD Single Xenon D2S Projector Retrofit *Projectors NOT Included*
$759.99........TL DOT LHD Bi-Xenon D2S Projector Retrofit *Projectors NOT Included*
(Projectors can be drop shipped to me to save on shipping them twice, PM me for a shipping address if needed.)

Optional Upgrades & Do-It-Yourself Products:
$75.00 Genuine Carbon Fiber Shrouds
$75.00 Genuine Colored Kevlar Shrouds
$45.00 Fiberglass Shrouds
$(Comming Soon) ~2.5" Front LED Parking/Turn Signals
$(Comming Soon) LED Flasher Relay Mod
$57.99 2.25" Custom Chrome Trim Bezels
$24.99 2.5" Custom Chrome Trim Rings
$9.99 Color Matched Paint Job
$FREE Satin Black, Flat Black, or Gloss Black Paint Job
$FREE Projector Modifications (Color, Cutoff, and Foreground Lighting Mods)

Optional Stripper/Adder Packages:
***These items are removed from the Retrofit if you already have them and wish to use yours or purchased separately for your own Retrofit***
$219.00......Depo Brand Replacement Headlights
$219.00......D2S HID Kit (4300K Bulbs, Ballasts, Wire harness)
$50.00.......Wire Harness (If you have a D2S HID kit (bulbs and ballasts), but require a wire harness)
$75.00.......Carbon Fiber Shroud Set
$75.00.......Colored Kevlar Shroud Set
$45.00.......Fiberglass Shroud Set
Shrouds are the same that I use for my Retrofits, but require cutting/trimming for final fitment of your personal retrofit. They will look similar to the shroud design in this picture...


For a customized painting scheme, use this picture as a reference when choosing the area's you want painted and what color they should be. If you want them left alone (chrome or factory black in these specific areas) you do not have to mention them. (NOTE: the area of the housing next to and behind the shroud will be the same color as the shroud/area B.)


You can send me a PM with your order details including the paint scheme/options.

Payments can be sent via Paypal: [email protected]
 

·
Banned
Joined
·
1,276 Posts
Discussion Starter · #6 ·
I will put customers on the list when payment has been verified. The order of customers will be determined by the payment date. I need at a minimum of 5 customers in order to start ordering parts. I expect to have 1-2 retrofits completed every week once the ball gets rolling. The HID components will be shipped to the customers when we get 5 HID retrofit orders, and the headlights/projectors will ship when they are completed.
 

·
Premium Member
Joined
·
7,976 Posts
I see your offering Porshe units. I have a set of those and they are great units but they will require some work to get them to fit and still retain the rear of the housing opening for the most part all due to that pesky solenoid hanging down on the bottom. If you need a pair of those to buy for a retro your selling/sold, let me know as I have had this pair up for sale for a lonnnng time and it never sold here http://www.srtforums.com/forums/showthread.php?t=291428&highlight=porshe
 

·
Banned
Joined
·
1,276 Posts
Discussion Starter · #8 ·
Thanks for the info... If I get a request for that projector, I'll send you a PM. Also, if any customers would like to buy them for their retrofit, just have Haknlsash drop ship them to me. This set would be about $35 savings over the standard price. :thumbsup:
 

·
Premium Member
Joined
·
7,976 Posts
FYX193 said:
Thanks for the info... If I get a request for that projector, I'll send you a PM. Also, if any customers would like to buy them for their retrofit, just have Haknlsash drop ship them to me. This set would be about $35 savings over the standard price. :thumbsup:
I can drop ship to you :thumbsup: . Just make sure any customers that are thinking of getting that projector, just please contact me prior to them buying it so that I can let you know I still have it for sale. :thumbsup:



Best of luck my man!
 

·
Banned
Joined
·
1,276 Posts
Discussion Starter · #10 ·
Here's a little preview on the LED option. The blinking portion will turn on when the signals are active. The outer ring of LEDs are always on as parking lights.

 

·
Registered
Joined
·
572 Posts
Do you offer anything like this from Autolumanation?



Thanks,
Joe
 

·
Banned
Joined
·
1,276 Posts
Discussion Starter · #13 ·
No, I do not offer the autolumination type bulbs. This is a custom made LED circuit board that fits into the turn signal reflector bowl. It fills the entire bowl, and is going to be much brighter than anything that autolumination or anyone else can provide. These units will be sold separately for those who want to buy them for their own (personal) retrofits. In order for these to work, you must be able to separate the headlight lenses from the housings. This can only be performed easily with a set of Depo OEM replacement headlights.

Prices will be posted when the prototype is complete and the product is ready to sell.
 

·
Premium Member
Joined
·
6,496 Posts
I'd like to leave a deposit as well. I have an 05 though. What would be the cheapest route with black housings?
 

·
Banned
Joined
·
1,276 Posts
Discussion Starter · #17 ·
$454.99........Valeo *Halogen Only* Projector Retrofit (Easily upgrades to HID when ready!) *Projectors NOT Included*
$679.99........Valeo Halogen Projector Retrofit with D2S HID Adapter (HID Upgrade Included!) *Projectors NOT Included*

The only problem with getting one of these options, is you would have to provide me with the projectors.

The $679.99 price would be the same for any Single Xenon projector that you provide to me. This would be the cheapest route (not considering the price you pay for the projectors) for a HID retrofit.

The deposit is $100.00 non-refundable, to hold your place in queue with the group buy. If you are one of the 1st 5 customers, you will get a $20.00 discount and an optional color matched paint job if you choose it.

All other options are extra, and can be paid for before your retrofit has started.
 

·
Premium Member
Joined
·
6,496 Posts
Alright...I need help looking for some projectors. I have no idea what I'm looking for. I dont really care about them being bi-xenon though cause I dont forsee using my high beams.
 

·
Forum Moderator
Joined
·
13,295 Posts
Do you have any examples of the chrome trim bezels you'll be carrying?
 

·
Banned
Joined
·
1,276 Posts
Discussion Starter · #20 · (Edited)
I will be providing the same bezels from HIDPlanet.com. If a customer has found and provided me a set of nice bezels that fit their projectors and would like to use them, I will include them into the retrofit at no additional charge. If I can find another source of decent looking bezels, I will post additional bezel options.

Here's the ones HIDplanet offers...


2.25" Chrome Custom Trim Bezels:

Our smooth chrome bezels finish off your project with a soft taper and curve that compliments any custom job.

This piece is a universal fit for any 2.25 inch lens opening. We have tested it with single xenon Valeo, single xenon TSX and single xenon e46 projectors and they are a great fit.

Chrome Trim Ring Dimensions:

# Max Outer Diameter = 2 7/8"
# Inner Diameter = 2 1/4"
# Max depth = 1/2"
# Fits Lens Diameter of 2 1/4"
$57.99 for 2.25" Custom Chrome Trim Bezels




2.5" Chrome Custom Trim Rings:

Use these chrome custom trim rings to fit over your 2.5" projector lens. These trim rings give your project a finished look and complete your project.

Our custom chrome trim rings are a universal fit piece. They are a custom piece and come with mounting screws but it is recommended to mount to projectors with a strong heat resistant adhesive.

Chrome Trim Ring Dimensions:

# Max Outer Diameter = 4"
# Inner Diameter = 2 1/2"
# Max depth = 3/8"
# Fits Lens Diameter of 2 1/2"
$24.99 for 2.5" Custom Chrome Trim Rings

The cost of shipping is included into the bezel options.
 
1 - 20 of 478 Posts
Top