Dodge SRT Forum banner

21 - 36 of 36 Posts

·
Registered
Joined
·
1,829 Posts
phucough said:
neonmarine said:
Ya, right...More boost+nitrous=I'm faster than __________ (sign here).
You couldnt run a big enough shot of N20 to save you.
Built motor/PnP(by JoshFBM)head with 1mm OS valves
Crower S3 cams Fidanza Gears
AGP kit w/Ceramic BB HP61 S5/.82 AR
AEM EMS w/UEGO
AEM 3.5 bar map sensor+RAGETEK map adaptor w vacuum block
RC1000cc injectors
Aaroneon injector driver
Boomba fuel rail
Hallman RX Evolution incabin MBC
"Fullblown" dual 255lph Walbros
AGP return line w Aeromotive regulator
RPM services 62mm TB w spacer(ported to 68MM by FB Josh)
PNP intake manifold(ported by FB Josh)
Boomba intake manifold gasket
160deg. thermostat
AGP plug wires
PWERKS S2 tranny
AGP billet shift selector
DSS axles
AVID motor/tranny mounts
Custom CM FX700 twin disk clutch(1 kevlar/1 ceramic disk)
RAGETEK billet clutchmaster pushrod adaptor
PSI-FI billet traction bushings
MSS crossdrilled/slotted rotors w/SS brakelines
IPP coilovers
AGP race FMIC with AGP IC piping
TWM shortthrow shifter w .44 magnum shift knob
Maxxfab side exit (catless w resonator)
TiAL 38mm WG
TiAL 50mm BOV
PT checkvalve
AGP CAI w KN 3in filter
Bwoody catch can
and more........
Signed,
PHUCOUGH

The same could be said to you :hi: :eveilgrin
Yes Aaron this is true.But I can still jump in my car and go to the grocery store.:readclose Can you?:readclose :rofl:
 

·
Registered
Joined
·
4,991 Posts
phucough said:
phucough said:
neonmarine said:
Ya, right...More boost+nitrous=I'm faster than __________ (sign here).
You couldnt run a big enough shot of N20 to save you.
Built motor/PnP(by JoshFBM)head with 1mm OS valves
Crower S3 cams Fidanza Gears
AGP kit w/Ceramic BB HP61 S5/.82 AR
AEM EMS w/UEGO
AEM 3.5 bar map sensor+RAGETEK map adaptor w vacuum block
RC1000cc injectors
Aaroneon injector driver
Boomba fuel rail
Hallman RX Evolution incabin MBC
"Fullblown" dual 255lph Walbros
AGP return line w Aeromotive regulator
RPM services 62mm TB w spacer(ported to 68MM by FB Josh)
PNP intake manifold(ported by FB Josh)
Boomba intake manifold gasket
160deg. thermostat
AGP plug wires
PWERKS S2 tranny
AGP billet shift selector
DSS axles
AVID motor/tranny mounts
Custom CM FX700 twin disk clutch(1 kevlar/1 ceramic disk)
RAGETEK billet clutchmaster pushrod adaptor
PSI-FI billet traction bushings
MSS crossdrilled/slotted rotors w/SS brakelines
IPP coilovers
AGP race FMIC with AGP IC piping
TWM shortthrow shifter w .44 magnum shift knob
Maxxfab side exit (catless w resonator)
TiAL 38mm WG
TiAL 50mm BOV
PT checkvalve
AGP CAI w KN 3in filter
Bwoody catch can
and more........
Signed,
PHUCOUGH

The same could be said to you :hi: :eveilgrin
Yes Aaron this is true.But I can still jump in my car and go to the grocery store.:readclose Can you?:readclose :rofl:
Hmm... couple of questions:

Why can't Aaron drive to the grocery store? Did he walk in and forget pants again? Also, since when did this intake manifold thread turn into an e-penis paper racing contest? Would you like me to join the frey of non-running but should be running fast times little circle jerk here?
 

·
Registered
Joined
·
35 Posts
raven said:
phucough said:
phucough said:
neonmarine said:
Ya, right...More boost+nitrous=I'm faster than __________ (sign here).
You couldnt run a big enough shot of N20 to save you.
Built motor/PnP(by JoshFBM)head with 1mm OS valves
Crower S3 cams Fidanza Gears
AGP kit w/Ceramic BB HP61 S5/.82 AR
AEM EMS w/UEGO
AEM 3.5 bar map sensor+RAGETEK map adaptor w vacuum block
RC1000cc injectors
Aaroneon injector driver
Boomba fuel rail
Hallman RX Evolution incabin MBC
"Fullblown" dual 255lph Walbros
AGP return line w Aeromotive regulator
RPM services 62mm TB w spacer(ported to 68MM by FB Josh)
PNP intake manifold(ported by FB Josh)
Boomba intake manifold gasket
160deg. thermostat
AGP plug wires
PWERKS S2 tranny
AGP billet shift selector
DSS axles
AVID motor/tranny mounts
Custom CM FX700 twin disk clutch(1 kevlar/1 ceramic disk)
RAGETEK billet clutchmaster pushrod adaptor
PSI-FI billet traction bushings
MSS crossdrilled/slotted rotors w/SS brakelines
IPP coilovers
AGP race FMIC with AGP IC piping
TWM shortthrow shifter w .44 magnum shift knob
Maxxfab side exit (catless w resonator)
TiAL 38mm WG
TiAL 50mm BOV
PT checkvalve
AGP CAI w KN 3in filter
Bwoody catch can
and more........
Signed,
PHUCOUGH

The same could be said to you :hi: :eveilgrin
Yes Aaron this is true.But I can still jump in my car and go to the grocery store.:readclose Can you?:readclose :rofl:
Hmm... couple of questions:

Also, since when did this intake manifold thread turn into an e-penis paper racing contest? Would you like me to join the frey of non-running but should be running fast times little circle jerk here?
My thoughts exactly......:) Lets get back on topic!

-Jim
JM Fab
 

·
Registered
Joined
·
37 Posts
JMFabrications said:
unicorn said:
I just gave my shop the money for your intake manifold. They will be ordering Monday. I got it polished and with the Map sensor mount. How long do you think before I see it in my hands?
Hey,

All of the intakes are made to order so ship time is about 7-10 business days, shipping from PA to FL is 3 days, figure around the 27th or 30th to be safe. What is the name of the shop?

Thanks,
Jim
Still waiting. I just want to hold and see it and last put that biotch on my car. Can you give me any info on whats up with my order? Stage6 motorsports ordered it in Jacksonville Fl.
 

·
Registered
Joined
·
35 Posts
unicorn said:
JMFabrications said:
unicorn said:
I just gave my shop the money for your intake manifold. They will be ordering Monday. I got it polished and with the Map sensor mount. How long do you think before I see it in my hands?
Hey,

All of the intakes are made to order so ship time is about 7-10 business days, shipping from PA to FL is 3 days, figure around the 27th or 30th to be safe. What is the name of the shop?

Thanks,
Jim
Still waiting. I just want to hold and see it and last put that biotch on my car. Can you give me any info on whats up with my order? Stage6 motorsports ordered it in Jacksonville Fl.
Sorry but we dont have any orders from them, they arent even one of our vendors so you might want to check with them to see if they even placed the order?!

Thanks,
Jim
JM Fab
 

·
Registered
Joined
·
37 Posts
supermech21 said:
stage 6 is legit...you shouldnt worry about that...i like the e-fight going on...i know the one dude has some crazy nitrous set up...
Ya I know Stage6 is legit I have had all my work done from them. I not worried at all. I know all the guys up there. Ive been with them for a really long time.
 

·
Registered
Joined
·
37 Posts
JMFabrications said:
unicorn said:
JMFabrications said:
unicorn said:
I just gave my shop the money for your intake manifold. They will be ordering Monday. I got it polished and with the Map sensor mount. How long do you think before I see it in my hands?
Hey,

All of the intakes are made to order so ship time is about 7-10 business days, shipping from PA to FL is 3 days, figure around the 27th or 30th to be safe. What is the name of the shop?

Thanks,
Jim
Still waiting. I just want to hold and see it and last put that biotch on my car. Can you give me any info on whats up with my order? Stage6 motorsports ordered it in Jacksonville Fl.
Sorry but we dont have any orders from them, they arent even one of our vendors so you might want to check with them to see if they even placed the order?!

Thanks,
Jim
JM Fab
Thanks for the info. Ill check with them later on today, I dont know if they order stuff under another name, Thanx for the info.
 

·
Registered
Joined
·
35 Posts
Im gonna start a new thread since this one got way off topic, ill also put together some better pricing. Give me a day or so to get things together.

Thanks,
Jim
JM Fab
 

·
Registered
Joined
·
810 Posts
JMFabrications said:
Im gonna start a new thread since this one got way off topic, ill also put together some better pricing. Give me a day or so to get things together.

Thanks,
Jim
JM Fab
It's been a week, any word?
 
21 - 36 of 36 Posts
Top