Dodge SRT Forum banner

1 - 20 of 36 Posts

·
Registered
Joined
·
78 Posts
Discussion Starter #1
Your product looks incredible. I am sure we would find interest in a group buy.It would be great if we could get one going. Thanks

LOL i mispelled BUY... :)
 

·
Registered
Joined
·
1,829 Posts
neonmarine said:
Ya, right...More boost+nitrous=I'm faster than __________ (sign here).
You couldnt run a big enough shot of N20 to save you.
Built motor/PnP(by JoshFBM)head with 1mm OS valves
Crower S3 cams Fidanza Gears
AGP kit w/Ceramic BB HP61 S5/.82 AR
AEM EMS w/UEGO
AEM 3.5 bar map sensor+RAGETEK map adaptor w vacuum block
RC1000cc injectors
Aaroneon injector driver
Boomba fuel rail
Hallman RX Evolution incabin MBC
"Fullblown" dual 255lph Walbros
AGP return line w Aeromotive regulator
RPM services 62mm TB w spacer(ported to 68MM by FB Josh)
PNP intake manifold(ported by FB Josh)
Boomba intake manifold gasket
160deg. thermostat
AGP plug wires
PWERKS S2 tranny
AGP billet shift selector
DSS axles
AVID motor/tranny mounts
Custom CM FX700 twin disk clutch(1 kevlar/1 ceramic disk)
RAGETEK billet clutchmaster pushrod adaptor
PSI-FI billet traction bushings
MSS crossdrilled/slotted rotors w/SS brakelines
IPP coilovers
AGP race FMIC with AGP IC piping
TWM shortthrow shifter w .44 magnum shift knob
Maxxfab side exit (catless w resonator)
TiAL 38mm WG
TiAL 50mm BOV
PT checkvalve
AGP CAI w KN 3in filter
Bwoody catch can
and more........
Signed,
PHUCOUGH
 

·
Registered
Joined
·
810 Posts
phucough said:
neonmarine said:
Ya, right...More boost+nitrous=I'm faster than __________ (sign here).
You couldnt run a big enough shot of N20 to save you.
Built motor/PnP(by JoshFBM)head with 1mm OS valves
Crower S3 cams Fidanza Gears
AGP kit w/Ceramic BB HP61 S5/.82 AR
AEM EMS w/UEGO
AEM 3.5 bar map sensor+RAGETEK map adaptor w vacuum block
RC1000cc injectors
Aaroneon injector driver
Boomba fuel rail
Hallman RX Evolution incabin MBC
"Fullblown" dual 255lph Walbros
AGP return line w Aeromotive regulator
RPM services 62mm TB w spacer(ported to 68MM by FB Josh)
PNP intake manifold(ported by FB Josh)
Boomba intake manifold gasket
160deg. thermostat
AGP plug wires
PWERKS S2 tranny
AGP billet shift selector
DSS axles
AVID motor/tranny mounts
Custom CM FX700 twin disk clutch(1 kevlar/1 ceramic disk)
RAGETEK billet clutchmaster pushrod adaptor
PSI-FI billet traction bushings
MSS crossdrilled/slotted rotors w/SS brakelines
IPP coilovers
AGP race FMIC with AGP IC piping
TWM shortthrow shifter w .44 magnum shift knob
Maxxfab side exit (catless w resonator)
TiAL 38mm WG
TiAL 50mm BOV
PT checkvalve
AGP CAI w KN 3in filter
Bwoody catch can
and more........
Signed,
PHUCOUGH
:readclose :rofl: :rofl: :rofl: :rofl:
 

·
Registered
Joined
·
18,140 Posts
phucough said:
neonmarine said:
Ya, right...More boost+nitrous=I'm faster than __________ (sign here).
You couldnt run a big enough shot of N20 to save you.
Built motor/PnP(by JoshFBM)head with 1mm OS valves
Crower S3 cams Fidanza Gears
AGP kit w/Ceramic BB HP61 S5/.82 AR
AEM EMS w/UEGO
AEM 3.5 bar map sensor+RAGETEK map adaptor w vacuum block
RC1000cc injectors
Aaroneon injector driver
Boomba fuel rail
Hallman RX Evolution incabin MBC
"Fullblown" dual 255lph Walbros
AGP return line w Aeromotive regulator
RPM services 62mm TB w spacer(ported to 68MM by FB Josh)
PNP intake manifold(ported by FB Josh)
Boomba intake manifold gasket
160deg. thermostat
AGP plug wires
PWERKS S2 tranny
AGP billet shift selector
DSS axles
AVID motor/tranny mounts
Custom CM FX700 twin disk clutch(1 kevlar/1 ceramic disk)
RAGETEK billet clutchmaster pushrod adaptor
PSI-FI billet traction bushings
MSS crossdrilled/slotted rotors w/SS brakelines
IPP coilovers
AGP race FMIC with AGP IC piping
TWM shortthrow shifter w .44 magnum shift knob
Maxxfab side exit (catless w resonator)
TiAL 38mm WG
TiAL 50mm BOV
PT checkvalve
AGP CAI w KN 3in filter
Bwoody catch can
and more........
Signed,
PHUCOUGH

The same could be said to you :hi: :eveilgrin
 

·
Registered
Joined
·
1,314 Posts
phucough said:
neonmarine said:
Ya, right...More boost+nitrous=I'm faster than __________ (sign here).
You couldnt run a big enough shot of N20 to save you.
Built motor/PnP(by JoshFBM)head with 1mm OS valves
Crower S3 cams Fidanza Gears
AGP kit w/Ceramic BB HP61 S5/.82 AR
AEM EMS w/UEGO
AEM 3.5 bar map sensor+RAGETEK map adaptor w vacuum block
RC1000cc injectors
Aaroneon injector driver
Boomba fuel rail
Hallman RX Evolution incabin MBC
"Fullblown" dual 255lph Walbros
AGP return line w Aeromotive regulator
RPM services 62mm TB w spacer(ported to 68MM by FB Josh)
PNP intake manifold(ported by FB Josh)
Boomba intake manifold gasket
160deg. thermostat
AGP plug wires
PWERKS S2 tranny
AGP billet shift selector
DSS axles
AVID motor/tranny mounts
Custom CM FX700 twin disk clutch(1 kevlar/1 ceramic disk)
RAGETEK billet clutchmaster pushrod adaptor
PSI-FI billet traction bushings
MSS crossdrilled/slotted rotors w/SS brakelines
IPP coilovers
AGP race FMIC with AGP IC piping
TWM shortthrow shifter w .44 magnum shift knob
Maxxfab side exit (catless w resonator)
TiAL 38mm WG
TiAL 50mm BOV
PT checkvalve
AGP CAI w KN 3in filter
Bwoody catch can
and more........
Signed,
PHUCOUGH
Afraid.....SO AFRAID:wah?!: , you ain't the biggest fish in the pond:eveilgrin . See you when I'm tuned!!
 

·
Registered
Joined
·
1,105 Posts
You guys aint got shit on me, S0 for the win :rainy:
 

·
Registered
Joined
·
35 Posts

·
Registered
Joined
·
2,929 Posts
phucough said:
neonmarine said:
Ya, right...More boost+nitrous=I'm faster than __________ (sign here).
You couldnt run a big enough shot of N20 to save you.
Built motor/PnP(by JoshFBM)head with 1mm OS valves
Crower S3 cams Fidanza Gears
AGP kit w/Ceramic BB HP61 S5/.82 AR
AEM EMS w/UEGO
AEM 3.5 bar map sensor+RAGETEK map adaptor w vacuum block
RC1000cc injectors
Aaroneon injector driver
Boomba fuel rail
Hallman RX Evolution incabin MBC
"Fullblown" dual 255lph Walbros
AGP return line w Aeromotive regulator
RPM services 62mm TB w spacer(ported to 68MM by FB Josh)
PNP intake manifold(ported by FB Josh)
Boomba intake manifold gasket
160deg. thermostat
AGP plug wires
PWERKS S2 tranny
AGP billet shift selector
DSS axles
AVID motor/tranny mounts
Custom CM FX700 twin disk clutch(1 kevlar/1 ceramic disk)
RAGETEK billet clutchmaster pushrod adaptor
PSI-FI billet traction bushings
MSS crossdrilled/slotted rotors w/SS brakelines
IPP coilovers
AGP race FMIC with AGP IC piping
TWM shortthrow shifter w .44 magnum shift knob
Maxxfab side exit (catless w resonator)
TiAL 38mm WG
TiAL 50mm BOV
PT checkvalve
AGP CAI w KN 3in filter
Bwoody catch can
and more........
Signed,
PHUCOUGH

Nice parts list I wanna see a time slip posted before I say the nitrous guy can't beat you.
 

·
Registered
Joined
·
37 Posts
I just gave my shop the money for your intake manifold. They will be ordering Monday. I got it polished and with the Map sensor mount. How long do you think before I see it in my hands?
 

·
Premium Member
Joined
·
6,496 Posts
SLO-SRT4 said:
phucough said:
neonmarine said:
Ya, right...More boost+nitrous=I'm faster than __________ (sign here).
You couldnt run a big enough shot of N20 to save you.
Built motor/PnP(by JoshFBM)head with 1mm OS valves
Crower S3 cams Fidanza Gears
AGP kit w/Ceramic BB HP61 S5/.82 AR
AEM EMS w/UEGO
AEM 3.5 bar map sensor+RAGETEK map adaptor w vacuum block
RC1000cc injectors
Aaroneon injector driver
Boomba fuel rail
Hallman RX Evolution incabin MBC
"Fullblown" dual 255lph Walbros
AGP return line w Aeromotive regulator
RPM services 62mm TB w spacer(ported to 68MM by FB Josh)
PNP intake manifold(ported by FB Josh)
Boomba intake manifold gasket
160deg. thermostat
AGP plug wires
PWERKS S2 tranny
AGP billet shift selector
DSS axles
AVID motor/tranny mounts
Custom CM FX700 twin disk clutch(1 kevlar/1 ceramic disk)
RAGETEK billet clutchmaster pushrod adaptor
PSI-FI billet traction bushings
MSS crossdrilled/slotted rotors w/SS brakelines
IPP coilovers
AGP race FMIC with AGP IC piping
TWM shortthrow shifter w .44 magnum shift knob
Maxxfab side exit (catless w resonator)
TiAL 38mm WG
TiAL 50mm BOV
PT checkvalve
AGP CAI w KN 3in filter
Bwoody catch can
and more........
Signed,
PHUCOUGH

Nice parts list I wanna see a time slip posted before I say the nitrous guy can't beat you.
::popcorn:
 

·
Registered
Joined
·
35 Posts
unicorn said:
I just gave my shop the money for your intake manifold. They will be ordering Monday. I got it polished and with the Map sensor mount. How long do you think before I see it in my hands?
Hey,

All of the intakes are made to order so ship time is about 7-10 business days, shipping from PA to FL is 3 days, figure around the 27th or 30th to be safe. What is the name of the shop?

Thanks,
Jim
 

·
Registered
Joined
·
587 Posts
This manifold is one of the best mods on my car. The fit is excellent and for the money you sure cant beat it. If anyone has a question about the manifold pm me ill answer what I can about my experience with it.
 
1 - 20 of 36 Posts
Top