Dodge SRT Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
198 Posts
Discussion Starter · #1 ·
Ok, i just purchased a greddy type-s. I read all install and did everything everyone said. i even got a bop. The thing is my bov dosent blow off....it just a lil hiss form the bov and flutter form the intake. No Mopar BOV but i do have a profec-b and i dont know if that messes up the install so i disconnected the b/c and just did the bov. It still dosent work. All i get is flutter. Im not using a uppipe... i made my own pipe....but dont worry all the piping is good. So if someone can tell me how to install or anyone with a b/c and greddy bov or soem sort of bov like that tell me how u installed....PLEASEEEEEEE!!!!! Let me know...PM me or post....
THANKS
ReDrOcKeT
 

·
Registered
Joined
·
6,135 Posts
where si your vacuum line t-ed into? it should be at the tb. if yours is there, then loosen up the screw.
 

·
Registered
Joined
·
961 Posts
Hey this is moparneonsrt4.....but ya it is hooked up at the tb andwe tried ajusting the screw alot....like everywhere
 
1 - 3 of 3 Posts
Top