Dodge SRT Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
I just recently wrecked the passenger side of my srt4, I'm looking for the measurements to make sure a have everything square before I start welding on the new panels. Any help would be greatly appreciated. Luckily the only thing the broke on my motor was the power steering resivior.
 

·
Administrator
Joined
·
38,903 Posts
Any body shop should be able to pull up the measurement, they are the same across all neons so it should be readily available. http://stowaway.us/srt/19079-pl_intlpdf.pdf is the FSM and the body section has some measurements as well as structural adhesive and weld points, so use that as a guide if you can't find anything else.
 
1 - 2 of 2 Posts
Top