Joined
·
309 Posts
anyone try FIC 2150s with prp? Any injector scaling suggestions? Otherwise I guess I'll just have to jack around with it for a while and hope I get close. Thanks in advance. Jon
FIC 2150's
1 - 1 of 1 Posts
1 - 1 of 1 Posts
Join the discussion
Recommended Reading
-
SCT and Turbo Toys
SCT Flash WorkgroupSo I have successfully found and test the HOM and DAB in the stage 2 and 3 toys ecus. I have them mapped in SCT but at this point they are not on the server. If anyone is interested in doing some testing pm me pls. I am working on the sprayers and have some cool plans for that- 12
- 4K
-
#137/200 · updated
-
Pcm code for sct.
SCT Flash WorkgroupOk so I've been on the phone twice with the eBay Store I bought my advantage 3 from trying to give them my pcm number so they can activate and ship. I got on here to research and found that I've been giving them the calibration ID. Unfortunately my pcm is missing the little sticker with my pcm...- 1
- 2K
-
Christopher Greenup · updated
-
The Sct Wiki
SCT Flash WorkgroupHi all I decided to create a Wiki for those of us in the SCT-SRT community. Since there is hardly any documentation out there for Advantage III on the DCX platform, and SCT shut their forums down to us, I felt a Wiki like this would give a great knowledge base for those of us that use the...- 150
- 43K
-
Nick Fury · updated
-
Few questions relating to VE table and Injector rescale
SCT Flash WorkgroupI will have my new engine next week : 8.5:1 cr JE pistons, port work, Crane #16 , GT35R, etc etc. I started from a Stage 2 tune and worked my way from there. Should I play with the VE table at all ? What is the difference between changing values in VE table and changing values in injector table...- 2
- 2K
Join now to ask and comment!