Dodge SRT Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
3,946 Posts
Discussion Starter · #1 ·
Is there a feed to the interior of our cars that has blinker and NOT combo with the brakes? do i have to tap the damn front lights to make this work for me?
 

·
Registered
Joined
·
1,367 Posts
Well it should be:
White/Tan wire for the Brake Lights
Black/Red for the Turn Signals

Sadly, as one filament is used for both in the US Housings I bet they've been connected somewhere under the dash to save $0.04 in wiring costs.
 

·
Registered
Joined
·
664 Posts
You also have to swap wires on the MFS because splicing just the wires in the rear wont work. 2gn hasa write up on this. I did it when I got my export tails
 

·
Registered
Joined
·
3,946 Posts
Discussion Starter · #5 ·
its so you can take a car "over there" as other countries require a yellow turn signal and ours are all off the same bulb. Yup after i posted and didn't get any replies I read all of that and figured for all the wiring it's not that important to me.
 
1 - 5 of 5 Posts
Top