Joined
·
2,768 Posts
Here it is....Group Buy #2 for you guys.
PLEASE READ THE WHOLE THING.........VERY CAREFULLY
The Core measurements on this FMIC are 24" X 12" X 4"
It does NOT require any heavy modification of the fascia for installation.
It DOES require the removal of your stock bumper beam(crash bar) and because of this, it is recommended for Off Road Use ONLY
CAST Endtanks with polished finish.
The OEM pipes will fit fine, or aftermarket hard pipes will fit as well.
Location and Drilling of your own mounting holes is required.
Price: $275 shipped
Prices are shipped in the lower 48 states, Canada and APO are extra(usually around $30 extra)
****Logo Option now available**** $30 for me to do it, or $15 for the stencil so you can do it.....please go to this link for more info and PICS!!!
http://www.srtforums.com/forums/showthread.php?p=4280145#post4280145
Now for the VERY IMPORTANT STUFF......Please read CAREFULLY
I will run this Group Buy through January 31st 2007. Payments are due when you are put on the list.
Now, AFTER ALL PAYMENTS FOR THE GROUP HAVE CLEARED and the GB is over(January 31st)....expected delivery time to your door is approx. 6 weeks. This is NOT a guaranteed time, it could possibly be less, but that is a safe bet since these are only being produced in small groups.
Let me say that again, just so noone says that I didn't.....Expected Wait time for delivery to your door is 6 weeks
It is definately Christmas guys....the Flow testing results are IN: Cooling Efficiency: 94% Pressure Drop: 1.4 [email protected] hp of airflow. Heat Soak: Unmeasurable (could not be determined). 15.6 whp and 18.3 ft.lbs of torque gained on a stock SRT-4.
****Painted Logo's will be available shortly. There will probably be 2 options available. Prices will tentatively be $30 for Me to do one of the painted logos, and $15 for there to be a vinyl stencil included with your FMIC for you to paint it. I will update if prices change, and also when pics are available****
So now that we have that all out of the way......Lets Crank this up.
Paypal is [email protected]
Please be ABSOLUTELY sure to include "SRTforums", AND your screenname in the paypal note for tracking purposes, and so I can add you to the list on here, and mark you as paid.
Price again is:
$275 shipped
Prices are shipped in the lower 48 states, Canada and APO are extra(usually around $30 extra)
Please feel more than free to PM me with any questions or concerns.
Also, PLEASE....NO THREAD CRAPPING.... if you don't like something about the sale, or something about the eVilcreations Big FMIC....then just don't buy one. This is not an SSac, XSpower, QW, or eBay product.
Outlet...(note, that is not weld slag in there......just the joy of cast end tanks)
Thanks guys,
Josh Koch
Owner
eVilcreations Performance
PLEASE READ THE WHOLE THING.........VERY CAREFULLY
The Core measurements on this FMIC are 24" X 12" X 4"
It does NOT require any heavy modification of the fascia for installation.
It DOES require the removal of your stock bumper beam(crash bar) and because of this, it is recommended for Off Road Use ONLY
CAST Endtanks with polished finish.
The OEM pipes will fit fine, or aftermarket hard pipes will fit as well.
Location and Drilling of your own mounting holes is required.
Price: $275 shipped
Prices are shipped in the lower 48 states, Canada and APO are extra(usually around $30 extra)
****Logo Option now available**** $30 for me to do it, or $15 for the stencil so you can do it.....please go to this link for more info and PICS!!!
http://www.srtforums.com/forums/showthread.php?p=4280145#post4280145
Now for the VERY IMPORTANT STUFF......Please read CAREFULLY
I will run this Group Buy through January 31st 2007. Payments are due when you are put on the list.
Now, AFTER ALL PAYMENTS FOR THE GROUP HAVE CLEARED and the GB is over(January 31st)....expected delivery time to your door is approx. 6 weeks. This is NOT a guaranteed time, it could possibly be less, but that is a safe bet since these are only being produced in small groups.
Let me say that again, just so noone says that I didn't.....Expected Wait time for delivery to your door is 6 weeks
It is definately Christmas guys....the Flow testing results are IN: Cooling Efficiency: 94% Pressure Drop: 1.4 [email protected] hp of airflow. Heat Soak: Unmeasurable (could not be determined). 15.6 whp and 18.3 ft.lbs of torque gained on a stock SRT-4.
****Painted Logo's will be available shortly. There will probably be 2 options available. Prices will tentatively be $30 for Me to do one of the painted logos, and $15 for there to be a vinyl stencil included with your FMIC for you to paint it. I will update if prices change, and also when pics are available****
So now that we have that all out of the way......Lets Crank this up.
Paypal is [email protected]
Please be ABSOLUTELY sure to include "SRTforums", AND your screenname in the paypal note for tracking purposes, and so I can add you to the list on here, and mark you as paid.
Price again is:
$275 shipped
Prices are shipped in the lower 48 states, Canada and APO are extra(usually around $30 extra)
Please feel more than free to PM me with any questions or concerns.
Also, PLEASE....NO THREAD CRAPPING.... if you don't like something about the sale, or something about the eVilcreations Big FMIC....then just don't buy one. This is not an SSac, XSpower, QW, or eBay product.
Outlet...(note, that is not weld slag in there......just the joy of cast end tanks)
Thanks guys,
Josh Koch
Owner
eVilcreations Performance