Dodge SRT Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
74 Posts
Discussion Starter · #1 ·
Long story short I now work w/ a person that was formally employed by a company that does high-end stand-alone engine mgmt. systems and we need a copy of the factory ECU pinout so that we can attempt to make a plug-in harness for our cars. If we can get these pin-outs I can probably have the system in the car and tuned by late winter early spring. If anyone can get me this info it would be greatly appreciated. This would make several current stand-alone systems possibly a plug and play for many of us.

thanks in advance!

Bill
 

·
Registered
Joined
·
879 Posts
Find the service manual online, it has the pin-outs listed in it.
 

·
Registered
Joined
·
1,481 Posts
Edmorales06 said:
I Need A Ecu Pinout So I Can Solder In My Afc Neo
Any Help I Can Get From Anyone?

Thanks Eddie
Hi Eddie,

Go to Google and just search for "SRT-4 Factory Service Manual". Find the section on powertrain diagnostics, I think it's called "PL Gas Powertrain" in the manual, then find the chapter 9.0 called "Connector Pinouts". All the engine and PCM connector information is contained in that chapter. You should be able to find what you need pretty quickly.

By the way, you do know that there is a how-to in the "How-To's" section for AFC installs, correct? You may have to search to find it, but it's there.

Good luck!
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top