Dodge SRT Forum banner

Detroit Show: Chrysler Unveils Production 300C/Magnum

1K views 5 replies 6 participants last post by  FreeLantz 
#1 ·
(TCC StaFF) The production versions of the Chrysler 300C sedan and Dodge Magnum sports tourer concepts were quietly introduced in New York October 7, with marketing execs proclaiming this the most significant model rollout for Chrysler since the LH platform buried the K-car in 1992.

Very little has changed since the concepts were introduced. The 300C was shod with 18-inch tires, as opposed to the 20-inchers sported by the concept, and both cars wore a little less chrome trim.

Both cars will hit dealer showrooms next spring and are based on the new LX rear-wheel drive platform. Engines will range from a 200-hp, 2.7-liter V-6 through a refined version of the 5.7-liter Hemi V-8 that produces 340 hp at 5200 rpm and 365 ft/lbs of torque at 4000 rpm, which should provide zero-to-sixty times of 6.5 seconds and a top speed in excess of 150 mph.

The transmission is a five-speed electronic AutoStick with a gated shifter, and ABS, all-speed traction control, and DC's Electronic Stability Program will be standard. A full-time AWD system will be an option on the Magnum.

Interiors of both cars feature watch-face instrumentation, adjustable pedals, four-spoke tilt-and-telescoping steering wheels, and, in the case of the 300C, elegant faux-tortoiseshell trim on the steering wheel, shift knob, and door pull handles.

In addition, approximately 20 percent of the LX platform shares componentry with Mercedes, particularly in drivetrain hardware, suspension modules, electrical systems, and seat modules.

Packaging and pricing details still need to be worked out with the dealer network, execs said, although they expect the 300C to compete at the low end with Toyota's Avalon, up through the Acura model line. -Paul W. Cockerham
 
See less See more
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top