Dodge SRT Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
So I bore the block to .50 over and I'm having some trouble trying to find a good head gasket for it. What brand, size and thickness would you guys recommend.

Thanks in advance!
 

·
Registered
Joined
·
1,234 Posts
I'm no expert but a .5mm piston increase...from 87.5mm (stock size) to 88mm will work just fine with a standard size head gasket.
In inches, the cylinder bore is enlarged by .020", which is .010" per side...roughly two human hairs.
 
1 - 5 of 5 Posts
Top