Dodge SRT Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
272 Posts
boost gauge
- unscrew vaccum line, power, and 2 screws holding pod to dash top.
- remove bulb/plastic piece. replace with LED.
- reinstall. needle will not glow.
- replace vaccum line. make sure it is on all the way. attach power wire.
- screw pod back into dash top.

done.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top