Dodge SRT Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1 (Edited)
I own a 2004 SRT4, Mopar Stage 2 w/o toys that has about 70k miles. Around 3 years ago, the stock turbo started leaking a ton of oil. Instead of rebuilding it, I decided it would be fun to go the big turbo route. My goal was to have about 350whp for a fun street car. After searching the forums, I bought a bunch of parts and went to work. For a number of reasons, I'm still working on it and hope to finish it all up later in the year and then get it tuned.

Having said that, I'd like to see if anyone would recommend anything else for my goals. Here's my parts list:

3" cold air intake
Upper/Lower hard pipes
AGP direct fit intercooler
HKS SSQ BOV
Zeta 2.8
925cc injectors
wally 255
AGP log exhaust manifold
Precision 39mm wastegate
3" O2/downpipe
Thermal R&D 3" exhaust (w/cat)
Wideband
ACT HDSS clutch
Solid engine and tranny mounts
Boost box
Catch can
Check valve

I've also done a lot of maintenance items:
Timing belt
Serpentine Belt
Water pump
Radiator
AC Condenser
Spark plugs/wires
Slave cylinder
Clutch fork
Pivot ball
Struts
Brakes
Calipers (mine were really rusty)
Rotors
Wheel hubs/bearings
 

·
Registered
Joined
·
2,591 Posts
looks good..
i would suggest 180 thermostat, changing to 80# injectors (duster360 tune), needswing dump, moog problem solver lca (prevent wheel hop)
 
1 - 3 of 3 Posts
Top