With in the recent introduction of the SRT-4, ACBC Powdercoating was anxious to start providing quality powdercoating service for their owners. We quickly purchase a valve cover to start powdercoating. Comparing paint chips to powder chips, we have effectively matched up all the stock colors. Yellow, Red, Silver and Black, and for those who don't want to stick with factory colors, we got you covered as well.
Add some color to that motor.
We have one in our core inventory and currently have 2 on back order.
To answer the question. He has been driving it hard and fast. :lol: We utilized a core from my inventory to powdercoat, while he kept his factory cover on. I shipped him the part, which will be installed and the stock part returned to me. Utilizing the core system, there is little down time.
To answer the question. He has been driving it hard and fast. :lol: We utilized a core from my inventory to powdercoat, while he kept his factory cover on. I shipped him the part, which will be installed and the stock part returned to me. Utilizing the core system, there is little down time.
For that you will have to check with your local service center. I know a lot of centers say, any modification to the engine, voids the engine portion of the warranty, others see it as what it is. A factory cover powdercoated.
James, Contact me and we can work out the details about getting you one.
So recently I purchased and started to restore a SRT-4 it has torn me down Built Me Up taught me a lot and burned a hole directly through my wallet roughly 9000 later including cost Parts labor shop fees extra stuff and just the usual I'm sitting with
Wci cc10 18s
Booger bushings
Short throw...
Ok so I have a agp large front mount intercooler right now. I just picked up a agp race intercooler from a local by me. But I am wondering if this is the best possible intercooler for high hp. I know these intercoolers are prown to cracking but I take percausions to keep that from happining.
My...
Just as the title says, have the set screw almost all the way in about 1/4" left and it is letting boost bleed at 7psi, should I put it in more? :readclose
any thoughts? thanks!
I was trying to add fuel via my DSP the other day, and it was doing little to nothing by adding 5%, then to 10%, it wasn't adding the fuel it should be.
I feel like it would be my fuel pressure regulator going bad? Has anyone else had this issue and fixed it with a FPR? I don't want to spend...
