Dodge SRT Forum banner

General Information

Name
Louie
Year
2005
Make
Dodge
Model
Neon srt4
Color
Flame red
So we think my ecu may be fried basically I had a dsp tune for 93 octane and catless dp with emissions coming up I put cat back on and went to tune car back to stock but now drove it for 100+ miles engine light solid when turn key to on but not start and for cat and evaporate sys and like 5 other things it says not supported anyone have any ideas I really need some help here

Modifications

Drivetrain
5spd
Exhaust
Stock
Suspension
Stock

Comments

· Registered
Joined
·
1 Posts
Is it a stock PCM (stage 0)? Staged PCM's will not have emissions monitoring points enabled and depending on which state you live in some testing centers may or may not detect this.
 

· Registered
Joined
·
0 Posts
Sorry for the late responses
Is it a stock PCM (stage 0)? Staged PCM's will not have emissions monitoring points enabled and depending on which state you live in some testing centers may or may not detect this.
but yes stock pcm it was flashed tuned though I live in Illinois also btw has no codes
 

· Registered
Joined
·
0 Posts
I’m bringing it into the shop I work at this tomorrow so I’ll let you guys know if i find anything out
 

· Registered
Joined
·
0 Posts
but honestly im pretty sure im gonna have to just buy an ecu and call it a day
 

· Registered
Joined
·
1 Posts
but honestly im pretty sure im gonna have to just buy an ecu and call it a day
Sounds like a problem you would get with staged PCMs.
But you can also send your PCM to DiabloSport and they can reflash it for you. I ended up having the exact same problem as you and before buying another stage 0 PCM, I sent it to diablo and they reflashed it for free. Problem solved.
 

· Registered
Joined
·
0 Posts
Sounds like a problem you would get with staged PCMs.
But you can also send your PCM to DiabloSport and they can reflash it for you. I ended up having the exact same problem as you and before buying another stage 0 PCM, I sent it to diablo and they reflashed it for free. Problem solved.
Thank you bro I appreciate it
 

· Registered
Joined
·
20 Posts
If you're tuned it's likely that the emissions monitors were turned off. You'll need to flash the original tune assuming your diablo made a backup of it. @duster360 would likely be able to help or at least point you in the right direction
 

· Registered
Joined
·
0 Posts
If you're tuned it's likely that the emissions monitors were turned off. You'll need to flash the original tune assuming your diablo made a backup of it. @duster360 would likely be able to help or at least point you in the right direction
i did when i put the cat back on and failed for the 2nd time is duster still active??
 

· Registered
Joined
·
1 Posts
i did when i put the cat back on and failed for the 2nd time is duster still active??
I don't think he's been active in the forums for a few years now but he's definitely still around. I don't want to post his info on here so you'll have to go to his website to get it www.needlesstorque.com
Either way, I wouldn't bother him with this issue. You already know what you need to do. If you successfully restored your original backup via your handheld tuner and your emissions monitoring points are still disabled, then you either a) have a staged PCM, i.e., stage 1 or b) your original backup did not restore correctly. Like I said contact Diablosport and they can reflash your PCM for you. I sent them a stage 2 PCM to flash to stock (stage 0) and they did it free of charge. All it cost me was shipping.
 
Top