Dodge SRT Forum banner

Search results

1-8 of 8 Results
  1. Replacement dipstick ?

    Engine/Turbos/Ignition
    I'll search for a turbo cruiser one though. Thanks.
  2. Replacement dipstick ?

    Engine/Turbos/Ignition
    Yeah, I messaged a srt graveyard here in NC, but I haven't heard anything back from him. Tried eBay, but they just seem to have caliber srt sticks. I didn't know if maybe there was something newer that would work that I could easily get my hands on.
  3. Replacement dipstick ?

    Engine/Turbos/Ignition
    As yet again, my srt4 continues to perturb me. I was leaned over the engine and I broke the t handle off my dipstick. Now I know that the factory one is discontinued, and that DCR makes one. But, is there a cheap replacement I can order that is correct for the engine ? It's not a super priority...
  4. Timing belt walking away from tensioner and cams

    Engine/Turbos/Ignition
    Yeah, that's what I was thinking too. Just to test.
  5. Need help. P0340

    Engine/Turbos/Ignition
    This sounds very similar to my 0016 code I was getting. 2500rpm and the car ran like crap, afr's all over the place. So I'll ask you to check a few things. I know you said you replaced both cam and crank sensor, check your terminals on the cam wiring harness. Check your U coolant hose going...
  6. Timing belt walking away from tensioner and cams

    Engine/Turbos/Ignition
    Good morning, No, I didn't have to remove any pully other drive pulley for the alternator/power steering. However this was done when I replaced it. This go round I just retimed the engine and didn't have to remove anything other than the giant cast bracket. At this point I do not have the cast...
  7. Timing belt walking away from tensioner and cams

    Engine/Turbos/Ignition
    I had a problem and posted about it a while back with a 0016 code. It was determined that the crank was off one tooth when i set my new timing belt up. This weekend was spent retiming the engine and the new problem i have is the timing belt keeps walking off the tensioner and then the exhaust...
  8. Quick question about rear struts

    Brakes/Suspension/Chassis
    Update: Changed out the rear struts... Definitely the wrong stuff. From just moving the car from one spot in the back yard to the other, rubbed the paint off to the metal on both rear struts. They have been replaced. Going to send a message to the store I purchased them from and let them know...
1-8 of 8 Results
Top