tuners step inside - SRT Forums

never2muchboost · 12-23-2005, 10:03 PM

im having a problem with an lc1 right now setting a heater 2 circuit code.i checked everything and its not the sensor or connector.any of you guys had this problem?
i thought it may have been the heater but i tried another sensor and same thing.

any ideas?

never2muchboost · 12-23-2005, 10:11 PM

also anyone ever have problems with the conversion from lc1 to e01?
right now running an ch1 and the conversion is 10-20 0-5v

never2muchboost · 12-23-2005, 10:51 PM

echooooo

Exhaust Depot · 12-23-2005, 11:09 PM

lET ME guess, the lc1 is not warming up and doing teh count down?

Had issues with a new one today.

never2muchboost · 12-23-2005, 11:22 PM

actully its warming up and starts working but i still get the code on initial key on.im getting it on the xd-1 and also on the laptop on initial key on i get heater 2 circuit.i reset everything and started over again and same thing.the heater is working though and is calibrating as well..im stumped unless its in the lc1 module.
hey hec have you run an lc1 to the e01 yet? what conversion are you using?