Which reading should i be paying attention A/F 10.1 or scangauge o2 millivolts 990 wot at some place between the 3000 rpm - 4500 sometimes even with map clamp all the way lean I can't see 11ss on my wide band gauge.
Any advice would be really appreciated
Thanks.
Mods:
2005
Intake
3 inch downpipe
FM Wastgate Actuator
FMIC 24x12x4
King map clamp
Walbro High Flow
Pump re-wire
LC-1 wideband
Aeroforce scangauge
Stage 0 pmc
HKS SSQ Blow Off Valve
17PSI holding 15
__________________
restivesoul
Last edited by Rogueshivers : 08-30-2008 at 04:06 PM.
Reason: missing info
does your 02 sensor work properly and is stationed on the exhaust properly?
hell yea no cat,the readings are within the normal range 14-15 on neutral on both displays gauge and laptop,at some moment i leaned out so much trying to see some a/f pass 10.5 that I took out the screw and still nothing....
someone ........
Last edited by Rogueshivers : 08-30-2008 at 08:32 PM.
990mv would be in the low 10 to 1 range. so your readings are good. what is your fuel pressure. you don't have one of those regulator mods do you. either ditch the map clamp and use an safc or control the fuel pressure.
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.
A/F 10.1-scangauge 02 millivolts 990 at WOT
Linear Mode
