hello everyone, yesterday i put the aem wideband in my car and it was working perfect. Now today all it will read is 10.0, even at idle. anyone have an idea what's wrong?
bought used? check wiring. replace sensor, replace gauge. not to hard of a setup. 5wires and a sensor. also improper placement in the exahaust track. ie: to close to the turbo. (should be 3ft plus away) will cause pre mature sensor failure. i had a sensor fail after 9months at about 1ft away from the turbo and the gauge readout went caput after a year.
__________________
canadian_srt4 "as long as vednors keep making parts, my car will always be on a hoist."
hello everyone, yesterday i put the aem wideband in my car and it was working perfect. Now today all it will read is 10.0, even at idle. anyone have an idea what's wrong?
Is it new or used? Did you try pulling the power off of it, to maybe try and reset it?
__________________
" So 12 hours of child birth wasn't enough pain,
so she had to get 50+ hours of work on her back"
anyone else had this problem? when i start the car it will read about 15 but after a few second it slowly drops to 10 and stays there no matter what i do
anyone else had this problem? when i start the car it will read about 15 but after a few second it slowly drops to 10 and stays there no matter what i do
might need a new sensor... see if u can borrow a friend or soo....
__________________
Dodge Cummins 5.9L 325 hp 610 tq
Chevy duraless 6.6L 300 hp 520 tq
Ford PowerJoke 7.3L 300 hp 570 tq
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.
aem wideband malfunctioning
Linear Mode
