Where is it? Going to do seafoam thought I knew which one it was then looked on an unlabeled picture and it's totally not where I was thinking. So if someone can explain where it is or just show me a picture with reference to it it would be greatly appreciated.
P.S. I tried to search but you can't use pcv in the search and I don't feel like hunting
I do it in everything at every oil change. about 500 before oil I put it in my oil and let it run through there. It's safe for just about every motor orifice you have.
__________________
Stage Slow...
It's gone... Back to Stock For Realz
Mopar makes a similar product. Its about $4 If I remember.. Its also known as combustion chamber cleaner.. This is very popular with Talons and DSM's. I used it off the throttle body vacuum line. Basically start the car and spray the foam into a disposable cup. Then take the vacuum line an slowly suck it up into the intake do about 1/2 the can this way. You will hear the car bog down. And it will start to make the car smoke so make sure you do it in a very open space.. If the car dies then just restart it. Once you have done 1/2 the can turn the car off let it sit for 10 minutes then put the other 1/2 of the can into the gas tank. After the car has been off 10 minutes let it run at idle and its going to pour out white smoke.. It will look like something is wrong.. LOL.. but its all ok.. Move the RPM's up to 2k for about 30 seconds but try to to rev too high. When the smoke minimizes your good to go. I will smoke for a few hours. Ohh and man it stinks smells like burnt hair.. LOL.. Some local groups do seafoam parties lol. HAVE FUN!!
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.
PCV Valve
Linear Mode
